Hello all, I have been using MRTG on and off for a couple of years now. I am currently working on a new deployment and some customization but have a problem. My system is set up on FreeBSD 5.1.2 using MRTG 2.10.14 and 14all.cgi. I searched the list archives and found someone with a similar problem, but I did not see any answer that worked for me.
When I run cfgmaker against a 5000 with old code (3 train), cfgmaker fails to learn the cisco port names ($if_port_name). Could this simply be because of old code? Does anyone know at what revision this problem goes away? When I use snmpget with snmp v1 and the same OID that cfgmaker uses I do get the port names. ------------ Second problem is on a Cat6500. When cfgmaker runs it does learn the $if_port_name(s) but there is no --ifdesc= option that will include the catalyst port name on the Title [target] : line. I was able to make a modified cfgmaker that worked to fix this, but it failed at making routers look right :) Thanks for any help. Jim Bazzano Sr. Network Engineer http://www.hearst.com 250 W55 St. NY NY 10019 [EMAIL PROTECTED] ========================================================= This e-mail message is intended only for the personal use of the recipient(s) named above. If you are not an intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the Hearst Information Services HelpDesk ([EMAIL PROTECTED]) immediately by e-mail and delete the original message. ========================================================= -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
