All the OIDs you seek for your PowerNet can be found on APC's FTP at ftp://ftp.apcc.com/apc/public/software/pnetmib/mib/
Download the mibs, load em up in GetIf, and start poking around. http://www.snmp4tpc.com will have the info you're looking for with regards to MRTG on Win32 Good luck to you! Jeremy D Pavleck Capella University (Capella.Edu) System Administrator - Systems Management IT Operations -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nicolas Raddatz Sent: Thursday, September 16, 2004 5:05 PM To: [EMAIL PROTECTED] Subject: [mrtg] MRTG and APC UPS Hi all, I want to monitor my APC Smart-UPS RT 5000 XL and APC Environmental Management System (EMS) AP 9320 using MRTG (Windows Platform). I've researched quite a lot, but still have some problems. Do you know what OIDs are available for them? Or maybe an example MRTG cfg file? I have found the following for the UPS: Runtime in minutes: 1.3.6.1.4.1.318.1.1.1.2.2.3.0 Unfortunately, the retrieved value is of no use, since MRTG doesn't understand what '0:30:00' means (30 minutes) and I get a nice ERROR: Target[ups_1][_IN_] ' $$target[0]{$mode} ' did not eval into defined data I could do a script to parse this, and have been investigating, I found a snmpget for Windows (net-snmp), but haven't been able to get anything from the UPS via command line. Strange. Using getif I can connect to it via SNMP. Temperature (celcius): 1.3.6.1.4.1.318.1.1.1.2.2.2.0 It "seems" to work (no error) but all I get is 0. Voltage (volts): 1.3.6.1.4.1.318.1.1.1.4.2.1.0 It "seems" to work (no error) but all I get is 0. Any help will be greatly appreciated. I'm sure someone out there has solved this before. Thanks. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
