Thanks that got me further, now I get this error:
Target[172.30.232.1]:
1.3.6.1.4.1.9.9.109.1.1.1.1.5.0&1.3.6.1.4.1.9.9.109.1.1.1.1.5.0:stiwanro
@172.30.232.1
YLegend[172.30.232.1]: CPU Utilization
ShortLegend[172.30.232.1]: %
MaxBytes[172.30.232.1]: 100
Options[172.30.232.1]: nopercent, gauge, unknaszero
Unscaled[172.30.232.1]: dwmy
Legend1[172.30.232.1]: CPU Utilization
Legend2[172.30.232.1]: .
Legend3[172.30.232.1]: Max value per interval on graph
Legend4[172.30.232.1]: .
LegendI[172.30.232.1]: CPU:
LegendO[172.30.232.1]: .
Title[172.30.232.1]: $DEVICE
PageTop[172.30.232.1]: <H1>$DEVICE</H1>
Colours[172.30.232.1]:
GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[172.30.232.1]: ymw
C:\MRTG\bin>perl mrtg springboard.cfg
SNMP Error:
no response received
SNMPv1_Session (remote host: "172.30.232.1" [172.30.232.1].160)
community: "stiwanro"
request ID: -943698335
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
SNMPGET Problem for 1.3.6.1.4.1.9.9.109.1.1.1.1.5.0
1.3.6.1.4.1.9.9.109.1.1.1.1.
5.0 sysUptime sysName on [EMAIL PROTECTED]:160
WARNING: skipping because at least the query for
1.3.6.1.4.1.9.9.109.1.1.1.1.5.0
on 172.30.232.1 did not succeed
ERROR: Target[172.30.232.1][_IN_] ' $$target[4]{$mode} ' did not eval
into defin
ed data
ERROR: Target[172.30.232.1][_OUT_] ' $$target[4]{$mode} ' did not eval
into defi
ned data
WARNING: Skipping Update of 172.30.232.1, inlast is not defined
WARNING: Skipping Update of 172.30.232.1, outlast is not defined
C:\MRTG\bin>
Thanks,
Spencer
________________________________
From: Muhammed Ali [mailto:[EMAIL PROTECTED]
Sent: Tuesday, February 15, 2005 1:39 PM
To: Plantier, Spencer; [EMAIL PROTECTED]
Subject: RE: [mrtg] cpu utilization
All the MRTG configuration lines should start from column 1 other wise
that line will be neglected by MRTG.
Regards
Muhammed Ali
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Plantier, Spencer
Sent: Tuesday, February 15, 2005 8:22 PM
To: [EMAIL PROTECTED]
Subject: [mrtg] cpu utilization
I went to Somix and got the configuration for CPU usage for a 1721. I
copied and pasted the config to my cfg file and I get the following
error:
arget[xxxxx]:
1.3.6.1.4.1.9.9.109.1.1.1.1.5.0&1.3.6.1.4.1.9.9.109.1.1.1.1.5.0:stiwanro
@xxxxx
YLegend[xxxxx]: CPU Utilization
ShortLegend[xxxxx]: %
MaxBytes[xxxxx]: 100
Options[xxxxx]: nopercent, gauge, unknaszero
Unscaled[xxxxx]: dwmy
Legend1[xxxxx]: CPU Utilization
Legend2[xxxxx]: .
Legend3[xxxxx]: Max value per interval on graph
Legend4[xxxxx]: .
LegendI[xxxxx]: CPU:
LegendO[xxxxx]: .
Title[xxxxx]: $DEVICE
PageTop[xxxxx]: <H1>$DEVICE</H1>
Colours[xxxxx]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[xxxxx]: ymw
C:\MRTG\bin>perl mrtg springboard.cfg
WARNING: "MaxBytes[xxxxx]" not specified
WARNING: Option[xxxxx]: "unscaled[xxxxx]:" is unknown
WARNING: Option[xxxxx]: "dwmy" is unknown
ERROR: Please fix the error(s) in your config file
I googled the error to no avail. Any help would be appreciated.
Thanks.
Spencer Plantier
System Network Administrator
301 Gregson Dr
Cary, NC 27511
Office 919-379-8513
Cell 919-272-8833
[EMAIL PROTECTED]
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
