Rebecca, When a target is commented out cfgmaker will tell the reason for it Inside the cfg file. If these are not clear please post (part of) your config file.
Hth, Jan. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rebecca Howett Sent: Monday, July 11, 2005 5:27 AM To: [EMAIL PROTECTED] Subject: [mrtg] FW: MRTG setup Hello, I am trying to get MRTG working but am having some problems. When I try to create a cfg file for my device using cfgmaker I get an error saying 'HighspeedCounters faild ... Droping back to V1'' and then everything in the generated cfg file is commented out. Below is the command I'm running and the output I get. Any help would be greatly appreciated. thanks, Rebecca C:\mrtg\mrtg\bin>perl cfgmaker [EMAIL PROTECTED]:::::2 --global "WorkDir: c :\mrtg\wwwroot" --output bhm.cfg --base: Get Device Info on [EMAIL PROTECTED]:::::2 --base: Vendor Id: --base: Populating confcache --snpo: confcache [EMAIL PROTECTED]:::::2 Descr Motorola PowerQUICC FEC --> 1 --snpo: confcache [EMAIL PROTECTED]:::::2 Descr Canopy Point to Point --> 2 --snpo: confcache [EMAIL PROTECTED]:::::2 Ip 127.0.0.1 --> 6 --snpo: confcache [EMAIL PROTECTED]:::::2 Ip 172.16.10.1 --> 1 --snpo: confcache [EMAIL PROTECTED]:::::2 Ip 192.168.101.1 --> 2 --snpo: confcache [EMAIL PROTECTED]:::::2 Name 1 --> 1 --snpo: confcache [EMAIL PROTECTED]:::::2 Name 2 --> 2 --snpo: confcache [EMAIL PROTECTED]:::::2 Type 6 --> 1 --snpo: confcache [EMAIL PROTECTED]:::::2 Type 6 --> 2 (duplicate) --snpo: confcache [EMAIL PROTECTED]:::::2 Eth 0a-00-3e-f1-97-96 --> 1 --snpo: confcache [EMAIL PROTECTED]:::::2 Eth 1a-00-3e-f1-97-96 --> 2 --base: Get Interface Info --base: Walking ifIndex --base: Walking ifType --base: Walking ifAdminStatus --base: Walking ifOperStatus --base: Walking ifHighSpeed --base: snmpget [EMAIL PROTECTED]:::::2 for ifHighSpeed.1 -> 0 Mb/s --base: snmpget [EMAIL PROTECTED]:::::2 for ifHCInOctets.1 -> 110210153 --base: check for HighspeedCounters faild ... Droping back to V1 --base: snmpget [EMAIL PROTECTED]:::::2 for ifHighSpeed.2 -> 0 Mb/s --base: snmpget [EMAIL PROTECTED]:::::2 for ifHCInOctets.2 -> 617437645 --base: check for HighspeedCounters faild ... Droping back to V1 --base: snmpget [EMAIL PROTECTED]:::::2 for ifHighSpeed.6 -> Mb/s --base: snmpget [EMAIL PROTECTED]:::::2 for ifHCInOctets.6 -> --base: check for HighspeedCounters faild ... Droping back to V1 --base: Writing bhm.cfg -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi _________________________________________________________ Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van dit bericht te vernietigen. _________________________________________________________ The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt. This message shall not constitute any obligations. This message is intended solely for the addressee. If you have received this message in error, please inform us immediately and delete its content. _________________________________________________________ -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
