I'm having difficulties setting up MRTG ver. 2.12.2 with RRDTool ver. 1.2.10-win32-perl58 on Microsoft Windows Server 2003 w/ SP1.
If I've installed the rrdtool perl module from a depository by using ppm, do I still need to specify it in my MRTG cfg file such as this line? ########## #RRD Perl module (RRDs.pm) location LibAdd: D:\Intranet\mrtg-2.11.1\bin\rrdtool-1.2.10-win32-perl58\rrdtool\bindings \perl-shared\ ########## I ask this because the RRDs.pm perl module is not included in the rrdtool-1.2.10-win32-perl58.zip file. In the RRDTool Integration doc is says to include the line where the perl module is located such as "LibAdd: c:\rrdtool\bin\lib\perl". When I try to run MRTG w/ RRDTool I get these errors: ########## D:\Intranet\mrtg-2.12.2\mrtg-2.12.2\bin>perl -w mrtg mrtg_ups_temp_probe.cfg WARNING: Daemonizing MRTG ... Do Not close this window. Or MRTG will die WARNING: can't do threshold checking for target breaker16.xxx.com_1(i) -- No valid current data WARNING: can't do threshold checking for target breaker16.xxx.com_1(i) -- No valid current data WARNING: can't do threshold checking for target breaker07.xxx.com_1(i) -- No valid current data WARNING: can't do threshold checking for target breaker07.xxx.com_1(i) -- No valid current data Terminating on signal SIGINT(2) ########## I'm only monitoring two APC UPS's as you can see above. Any help is appreciated. --Dan -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
