No, that still gives me the same results. Again, let me explain my configuration/situation.
The serial ports are connected to various non-IP devices, such as switch consoles, serial printers, UPSes, serial terminals, and consoles of sun machines. I'm looking for raw serial traffic, not protocol traffic. The As1-8 interfaces *only* get their traffic counters updated when IP traffic flows through those interfaces. Since none of the traffic to those ports is IP, I get no usage statistics. Hence, the interfaces As1-As8 are useless for tracking this information. I'm looking for an OID (if one even exists) which represents the raw byte counters for each of the individual tty lines, 1-8. The standard MIB for ifInOctets et al will not work for these interfaces. I'll do some poking around. I'll dump the entire mib tree and see if I can manually parse it for the information needed. Thanks, -Kelsey [EMAIL PROTECTED] wrote: > Sounds like you've got a "--ifref=ip" in your cfgmaker invocation. Try > using "--ifref=name". If should generate target lines for you async ports > that look like > > Target[Router_AsX]: #AsX:[EMAIL PROTECTED]: -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
