I have a port channel which is 4 gig ports etherchanneled together. Each
individual ports are showing correct values. But the port channel graphs
incorrectly. snmpget shows the correct value though. WHere can i modify in such
a way that it should show the correct value..
Thanks
-Biju
### Interface 317 >> Descr: 'Port-channel2' | Name: 'Po2' | Ip: '' | Eth: '' ###
Target[10-77-18-131_317]: 317:[EMAIL PROTECTED]:
SetEnv[10-77-18-131_317]: MRTG_INT_IP="" MRTG_INT_DESCR="Port-channel2"
MaxBytes[10-77-18-131_317]: 500000000
Title[10-77-18-131_317]: Traffic Analysis for 317 -- CAT1
PageTop[10-77-18-131_317]: <h1>Traffic Analysis for 317 -- CAT1</h1
>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>CAT1 - ATL
ta, GA</td>
</tr>
<tr>
<td>Maintainer:</td>
<td>EOC (111-111-1111)</td>
<tr>
<td>Maintainer:</td>
<td>EOC (111-111-1111)</td>
</tr>
<tr>
<td>Description:</td>
<td>Port-channel2 </td>
</tr>
<tr>
<td>ifType:</td>
<td>propVirtual (53)</td>
</tr>
<tr>
<td>ifName:</td>
<td>Po2</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>4000.0 MBites/s</td>
</tr>
</table>
</div>
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://lists.ee.ethz.ch/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
