Thanks for the reply. I've already upgraded to 2.48.
We've got a relatively small network, just a couple of hundred devices
to monitor, so I haven't implemented templates. Guess now's as good a
time as any!
-Joe
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of McDonald, Dan
Sent: Tuesday, December 20, 2005 8:06 AM
To: Mrtg
Subject: [mrtg] Re: WxGoos-1 & MRTG
On Mon, 2005-12-19 at 21:31 -0500, Wixted, Joe wrote:
> I'm trying to get one of these integrated with my
MRTG/rrd/routers2.cgi
> setup.
>
>
> The problem is, my graphs don't match the results I see from the
device,
> or from GetIf. The LAN monitor seems to work fine, but the Humidity
and
> Water sensors are way off. Humidity from the device reports ~15%,
from
> MRTG, it reports 104%. For the Water Sensor, the device reports 99,
but
> MRTG reports 792. Anyone have any suggestions?
don't use options 'bits', just guage.
Upgrade the Goose to 2.48 - that version seems to work the best. 2.46,
in particular has lots of troubles. If you have trouble upgrading, get
in touch with Pepe at IT Watchdogs - he's very helpful.
I'll upload my most recent version of a working template file to
http://www.austinnetworkdesign.com/mrtg/probe.template
The template auto-detects probes from UptimeDevices and ITwatchdogs and
creates a working configuration. I have a raft of templates there for
various devices, including IOS snmp V3 support when using the MRTG 2.13
release candidate
--
Daniel J McDonald, CCIE # 2495, CNX, CISSP # 78281
Austin Energy
[EMAIL PROTECTED]
gpg Key: http://austinnetworkdesign.com/pgp.key
Key fingerprint = B527 F53D 0C8C D38B DCC7 901D 2F19 A13A 22E8 A76A
-- Attached file removed by Ecartis and put at URL below --
-- Type: application/pgp-signature
-- Desc: This is a digitally signed message part
-- Size: 190 bytes
-- URL : http://lists.ee.ethz.ch/p/43A801A610289-signature.asc
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://lists.ee.ethz.ch/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://lists.ee.ethz.ch/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
