Hi, as regards Matrix N7, OID for CPU utilization should be this: 1.3.6.1.4.1.5624.1.2.49.1.1.1.1.3.[DFE#].1
where DFE# is the slot number of the DFE module being monitored. For sake of completeness, this is a fragment of our configuration: --------- # CPU usage for Matrix1 # etsysResourceCpuLoad1min OBJECT-TYPE # SYNTAX ResourceUtilization # MAX-ACCESS read-only # STATUS current # DESCRIPTION # "The average, over the last 1 minute, of the percentage # of time that this processor was not idle." Target[matrix1cpu-1]: 1.3.6.1.4.1.5624.1.2.49.1.1.1.1.3.1.1&1.3.6.1.4.1.5624.1.2.4 9.1.1.1.1.3.1.1:[EMAIL PROTECTED] [...] Target[matrix1cpu-4]: 1.3.6.1.4.1.5624.1.2.49.1.1.1.1.3.4.1&1.3.6.1.4.1.5624.1.2.49.1.1.1.1.3.4.1:[EMAIL PROTECTED] [...] Target[matrix1cpu-7]: 1.3.6.1.4.1.5624.1.2.49.1.1.1.1.3.7.1&1.3.6.1.4.1.5624.1.2.49.1.1.1.1.3.7.1:[EMAIL PROTECTED] ------------- Best Regards, Francesco Ferreri [EMAIL PROTECTED] wrote: > Hello Friends, > I am trying to measure the CPU utilization for Enterasys Matrix N3 and N7 > equipments and so far didn´t find the OIDs. Does any body know how? > Thanks a lot, > > Nilko > > I Conéctate con tu móvil a https://movil.bankinter.es -- -------------------------------------------------- Francesco Ferreri Network & Systems Engineer NaMeX phone: +39 06 44486 386 Via dei Tizii, 6b fax: +39 06 4957083 00185 - Rome mail: [EMAIL PROTECTED] Italy WWW: http://www.namex.it -------------------------------------------------- -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
