### Interface 1 >> Descr: '' | Name: '' | Ip: '' | Eth: '' ### ### The following interface is commented out because: ### * --ifref=descr is not unique for this interface
There is not a line in the snmpwalk for ifref. There is an ifAlias which is where the descriptions are placed for the ports though. Even if I unremark those, will that be a possible reason on why it still wont poll the data? -----Original Message----- From: Jay Hennigan [mailto:[EMAIL PROTECTED] Sent: Thursday, January 05, 2006 3:01 PM To: Aaron Clasby; [EMAIL PROTECTED] Subject: Re: [mrtg] Re: mrtg frustrations Aaron Clasby wrote: > I get a config file, and all the interfaces are rem'd out. Why? The config file should say in the comment line above the interface. "The following interface is commented out because [reason]. Often this is because you're specifying an ifref variable that is not unique for the interface. Look at the cfgmaker docs once you find the reason in the comment description. -- Jay Hennigan - CCIE #7880 - Network Administration - [EMAIL PROTECTED] NetLojix Communications, Inc. - http://www.netlojix.com/ WestNet: Connecting you to the planet. 805 884-6323 DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Cicada Companies. Finally, the recipient should check this email and any attachments for the presence of viruses. Cicada Companies accepts no liability for any damage caused by any virus transmitted by this email. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
