Hi, I found the problem about using mrtg to monitor 3COM 4400 SuperStack 3 switch. I'd like to monitor PORT1 with carrying tagged and untagged traffic. In fact, I'd like to plot only a number of incoming and outgoing packets on this port. I don't care which packet is tagged or not. The command I used for creating config file is " cfgmaker -global "options[_]:bits,growright" --global "workdir:/var/www/mrtg/esw-in" --ifref=name [EMAIL PROTECTED] > /etc/mrtg/mrtg-esw-in.cfg" As a result, I got the configuration file with all interfaces are commented out. In the configuration file, It's shown that the reason is "--ifref=name is not unique for this interface". The detail of the configuration of 3COM switch is as following: The switch has 3 vlan such as 1 (default), 100, 101.
VLAN ID |Port tagged | Port Untagged 100 | 1 | 2-20 101 | 1 | 21-22 1 | - |1, 23 and Management VLAN is VLAN 100 Could anyone point out the mistake? I have no idea to solve it. Best Regards, TI ----------------------------------------- This email was sent using SquirrelMail. https://front.psu.ac.th/ -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
