On Wed, 2006-12-27 at 13:12 +0530, Mahesh Bharadwaj wrote:
> Dear all,
> How we can configure *snmpv3* on a *cisco L3(3750).
You need the code that contains the crypto commands, with a K9 in the
file name.
e.g. Cisco IOS Software, C3750 Software (C3750-ADVIPSERVICESK9-M),
Version 12.2(25)SEE2
> *what are the commands
> required on the router
First, create a group
router(config)# snmp-server group mygroup v3 priv
then create a user
router(config)# snmp-server user myuser mygroup v3 auth sha mypassword
priv des mykey
You can grab the engineid from the show snmp user command. For this
example I'll say it is 800000090200000D63864E01
> and at the mrtg software ?
I normally use hashed keys:
[EMAIL PROTECTED] ~]snmpkey sha mypassword 800000090200000D63864E01 des mykey
authKey: 0x16b5ced4f1290c7114e803b14af8bff320a34ea2
privKey: 0xa45ce7bac56ac297d4d3dd0dd89c000c
[EMAIL PROTECTED] cfg]$ cfgmaker --if-template=iosv3.iftemplate
--ifref=name --interfaces --host-template=iosv3.template
--subdir=tlc/HOSTNAME --username='myuser'
--authkey='0x16b5ced4f1290c7114e803b14af8bff320a34ea2' --authproto='sha'
--privkey='0xa45ce7bac56ac297d4d3dd0dd89c000c' --privproto='des'
--output=/var/mrtg/cfg/tlc/tlc-net-2.cfg
'myuser'@[EMAIL PROTECTED]::2:1:1:3
I have a lot of customizations that I do with the templates, but it should work
fine without templates.
--
Daniel J McDonald, CCIE # 2495, CISSP # 78281, CNX
Austin Energy
http://www.austinenergy.com
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://lists.ee.ethz.ch/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
