Am 20 Mar 2007 um 22:00 hat Johannes Prost geschrieben: short update to this: after cut / paste the target log, it is no longer written. Is this caused by wrong values too ? The other tragets are all updated as expected.
One mistake below, which was changed before the update:The second OID. It has to read .1.3.6.1.4.1.311.1.1.3.1.1.1.2.0 Johannes > Hello all, > > it's a stupid question, but I am relly mixed up and don't get it to work > properly. > I want to graph free & committed RAM. The OID's I have correct, but the > output which mrtg > graphs is not correct and at the same time the line is just "dead", no up's > and down's so > to speak. > Here my cfg snippet: > > Target[ram]: > .1.3.6.1.4.1.311.1.1.3.1.1.1.1.0&.1.3.6.1.4.1.311.1.1.3.1.1.1.1.0:[EMAIL > PROTECTED] > AbsMax[ram]: 383000 > MaxBytes[ram]: 383000 > Options[ram]: growright, gauge, nopercent, nobanner > YLegend[ram]: RAM > ShortLegend[ram]: B > LegendI[ram]: > LegendO[ram]: > Legend1[ram]: Available RAM > Legend2[ram]: Committed RAM > > The machine has physical 383 MB Ram. My log file of the cfg file says nothing > about an > error. The file with the data of the target is running every 300 sec. but the > numbers are > the same all time, no updates. So I am assuming it must have to do something > with the > coorect MB size set for MaxBytes AbsBytes. > > Any help very appreciate. > > Johannes > > _______________________________________________ > mrtg mailing list > [email protected] > https://lists.oetiker.ch/cgi-bin/listinfo/mrtg _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
