You are getting this because you need two targets on the Target line:
Target[snr]:.1.3.6.1.2.1.10.94.1.1.3.1.4&.1.3.6.1.2.1.10.94.1.1.3.1.4:[EMAIL
PROTECTED]
Don't ask why, just do it. ;-) Then RTFM - it's in there. You need
two targets.
Paul
>>> "Paul Kelly" <[EMAIL PROTECTED]> 05/29/07 7:23 PM >>>
Hi,
I'm trying to run a very small mrtg config to monitor the SNR on my
cisco 1721, but everytime i run mrtg i get the following error
ERROR: Target[snr][_in_] '.1.3.6.1.2.1.10.94.1.1.3.1.
$target->[0]{$mode}' evaluated to ' xxxxxxx' instead of a number
ERROR: Target[snr][_out_] '.1.3.6.1.2.1.10.94.1.1.3.1.
$target->[0]{$mode}' evaluated to ' xxxxxxx' instead of a number
Where 'xxxxxxx' are just symbols, smiley face etc.
This is the config i am using :
EnableIPv6: no
WorkDir: c:\mrtgweb
Target[snr]:.1.3.6.1.2.1.10.94.1.1.3.1.4:[EMAIL PROTECTED]
Title[snr]: Cisco 1700 - SNR Analysis
Background[snr]: #ffffff
PageTop[snr]: <H1>Cisco 1700 - SNR Analysis</H1>
WithPeak[snr]: wmy
XSize[snr]: 500
YSize[snr]: 200
MaxBytes[snr]: 200000
Options[snr]: gauge, growright, nopercent
YLegend[snr]: SNR Value
ShortLegend[snr]: SNR
Legend1[snr]: Average
Legend2[snr]:
Legend3[snr]: Maximum
Legend4[snr]:
LegendI[snr]: Local SNR:
LegendO[snr]: Remote SNR:
As far as i can tell, i am using the correct oid according to
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=adslAturCurrSnrMgn
Can anybody shed any light on this?
Thanks in advance for any help.
Cheers
Paul
<http://2-m.deviantart.com/>
************************************
This email may contain privileged and/or confidential information that is
intended solely for the use of the addressee. If you are not the intended
recipient or entity, you are strictly prohibited from disclosing, copying,
distributing or using any of the information contained in the transmission. If
you received this communication in error, please contact the sender immediately
and destroy the material in its entirety, whether electronic or hard copy.
This communication may contain nonpublic personal information about consumers
subject to the restrictions of the Gramm-Leach-Bliley Act and the
Sarbanes-Oxley Act. You may not directly or indirectly reuse or disclose such
information for any purpose other than to provide the services for which you
are receiving the information.
There are risks associated with the use of electronic transmission. The sender
of this information does not control the method of transmittal or service
providers and assumes no duty or obligation for the security, receipt, or third
party interception of this transmission.
************************************
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
