Hi Steve
Thank you very much for the examples you provided. This should make it easier
to implement.
One last question:
Do I need to reboot my Exchange server or restart any Exchange related services
when I install this nsclient+++ or pnsclient?
You mentioned about the TCP port and that nsclient has to be started first
(before exchange) to function.
BTW: Which Exchange service use TCP port 1248?
I can maybe set a dependency on this service to have nsclient start first.
Please advice.
Thanks.
/Thomas> Message: 4> Date: Thu, 7 Jun 2007 11:49:27 +1200> From: "Steve
Shipway" <[EMAIL PROTECTED]>> Subject: Re: [mrtg] Monitor Exchange 2003 related
counters> To: "Thomas Olsen" <[EMAIL PROTECTED]>,> <[email protected]>>
Message-ID:> <[EMAIL PROTECTED]>> Content-Type: text/plain; charset="us-ascii">
> Exchange has a nasty habit of stealing the TCP port used by pNSclient.> You
need to either start nsclient first, or else configure Exchange to> use higher
numbered ports - there is a registry setting to do this, but> I cant remember
what it is. NSclient uses port tcp/1248. If this> happens, pnsclient just stops
working. Exchange, on the other hand,> continues on quite happily as it just
pinches a different port.> > > > Steve> > > > Here is a template for some
Exchange2003 counters (LHNAME=long hostname,> SHNAME=short hostname) which used
the mrtg-pnsclient.pl utility.> > > > Target[%SHNAME%-exch-smtpq]:
`mrtg-pnsclient.pl -H %LHNAME% -v COUNTER> -l "\\SMTP Server(_Total)\\Local
Queue Length" -v COUNTER -l "\\SMTP> Server(_Total)\\Remote Queue Length"`> >
Title[%SHNAME%-exch-smtpq]: %SHNAME% Exchange SMTP Queue> >
MaxBytes[%SHNAME%-exch-smtpq]: 10000> > PageTop[%SHNAME%-exch-smtpq]: null> >
LegendI[%SHNAME%-exch-smtpq]: lcl:> > LegendO[%SHNAME%-exch-smtpq]: rmt:> >
YLegend[%SHNAME%-exch-smtpq]: Queue Length> > ShortLegend[%SHNAME%-exch-smtpq]:
> > Legend1[%SHNAME%-exch-smtpq]: Local SMTP queue length> >
Legend2[%SHNAME%-exch-smtpq]: Remote SMTP queue length> >
Legend3[%SHNAME%-exch-smtpq]: Peak local SMTP queue length> >
Legend4[%SHNAME%-exch-smtpq]: Peak remote SMTP queue length> >
Options[%SHNAME%-exch-smtpq]: growright gauge> > SetEnv[%SHNAME%-exch-smtpq]:
MRTG_INT_DESCR="Exch: SMTP Queue"> > routers.cgi*Mode[%SHNAME%-exch-smtpq]:
generic> > routers.cgi*Options[%SHNAME%-exch-smtpq]: nopercent nomax fixunit>
integer nototal> > routers.cgi*Incompact[%SHNAME%-exch-smtpq]: no> >
routers.cgi*InSummary[%SHNAME%-exch-smtpq]: yes> >
routers.cgi*Icon[%SHNAME%-exch-smtpq]: mail-sm.gif> >
routers.cgi*Summary[%SHNAME%-exch-smtpq]: Exchange> > > >
Target[%SHNAME%-exch-tx]: `mrtg-pnsclient.pl -H %LHNAME% -v COUNTER -l> "\\SMTP
Server(_Total)\\Messages Received Total" -v COUNTER -l "\\SMTP>
Server(_Total)\\Messages Sent Total"`> > Title[%SHNAME%-exch-tx]: %SHNAME%
Exchange Message Transfer> > MaxBytes[%SHNAME%-exch-tx]: 10000> >
PageTop[%SHNAME%-exch-tx]: null> > LegendI[%SHNAME%-exch-tx]: in :> >
LegendO[%SHNAME%-exch-tx]: out:> > YLegend[%SHNAME%-exch-tx]: Messages/min> >
ShortLegend[%SHNAME%-exch-tx]: /min> > Legend1[%SHNAME%-exch-tx]: Inbound msg
transfer> > Legend2[%SHNAME%-exch-tx]: Outbound msg transfer> >
Legend3[%SHNAME%-exch-tx]: Peak Inbound transfer> > Legend4[%SHNAME%-exch-tx]:
Peak Outbound transfer> > Options[%SHNAME%-exch-tx]: growright perminute> >
SetEnv[%SHNAME%-exch-tx]: MRTG_INT_DESCR="Exch: Msg Transfer"> >
routers.cgi*Mode[%SHNAME%-exch-tx]: generic> >
routers.cgi*Options[%SHNAME%-exch-tx]: nopercent nomax fixunit> >
routers.cgi*Icon[%SHNAME%-exch-tx]: mail-sm.gif> >
routers.cgi*Summary[%SHNAME%-exch-tx]: Exchange> >
routers.cgi*InMenu[%SHNAME%-exch-tx]: no> > routers.cgi*Icon[Exchange]:
mail-sm.gif> > > > > One question though.> Have you seen any issues on your
Exchange server after installing> pNSclient or nsclient++?> I am a bit
reluctant to install any third party software of my Exchange> server which may
cause performance or stability issues.> > And if anybody has an example script
on how to nsclient to monitor> exchange SMTP mail queue, etc, it would be
great.> nd join the i'm Initiative now. It's free. Make it count!>
<http://im.live.com/messenger/im/home/?source=TAGWL_June07> > > > >
-------------- next part --------------> An HTML attachment was scrubbed...>
URL:
http://lists.oetiker.ch/pipermail/mrtg/attachments/20070607/fa7f903c/attachment-0001.html
> > ------------------------------>
_________________________________________________________________
With Windows Live Hotmail, you can personalize your inbox with your favorite
color.
www.windowslive-hotmail.com/learnmore/personalize.html?locale=en-us&ocid=TXT_TAGLM_HMWL_reten_addcolor_0607
_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
