Without seeing the actual relevant config text, I would guess: 1) you have the wrong OID - did you try it with snmpget?
2) there is something wrong with your poller text, somewhere in the Target[] line. _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Kim Sent: Tuesday, October 28, 2008 10:59 AM To: [email protected] Subject: [mrtg] MRTG error Hi I'd like to monitor active DS0 , but I got below error message. Could you let me know what's wrong? Thanks in advance. error status: noSuchName index 1 (OID: 1.3.6.1.4.1.9.10.19.1.1.9.1.3.4) SNMPv1_Session (remote host: "xxx.xxx.115.11" [xxx.xxx.115.11].161) community: "xxxx" request ID: 1173276819 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at E:/MRTG/bin\..\lib\mrtg2/SNMP_util.pm line 490 SNMPGET Problem for 1.3.6.1.4.1.9.10.19.1.1.9.1.3.4 1.3.6.1.4.1.9.10.19.1.1.9.1. 3.4 sysUptime sysName on [EMAIL PROTECTED]::::::v4only at mrtg line 1846 ERROR: Target[gw1.maverick][_IN_] ' $target->[40]{$mode} ' did not eval into def ined data ERROR: Target[gw1.maverick][_OUT_] ' $target->[40]{$mode} ' did not eval into de fined data ERROR: Target[gw2.maverick][_IN_] ' $target->[41]{$mode} ' did not eval into def ined data ERROR: Target[gw2.maverick][_OUT_] ' $target->[41]{$mode} ' did not eval into de fined data SNMP Error: Received SNMP response with error code error status: noSuchName
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
