You have in your config: MaxBytes[243.0.381.0]: 1250000 1,250,000 bytes = 10,000,000 bits.
Read the manual. Every rate higher than 1.25MBps = 10Mbps will be discarded due to this config setting. Double that number, plus some 10% for good measure. ----- Original Message ----- From: "Ivan Palacios" <[email protected]> To: <[email protected]> Sent: Friday, January 28, 2011 4:05 PM Subject: [mrtg] help I have problem to plot more than 10MB I have it as follows EnableIPv6: no WorkDir: /var/apache/htdocs/clientes/qos Options[_]: growright,bits WithPeak[_]: dymw forks:4 # If you want to get the information in bits type in the option line "Options[_]: growright, bits" #-----------243.0.381.0 ----------------- Target[243.0.381.0]: qidVcByteCountIn.243.0.381.0&qidVcByteCountOut.243.0.381.0:[email protected]. 160.253:::::2 MaxBytes[243.0.381.0]: 1250000 WithPeak[243.0.381.0]: ymwd Directory[243.0.381.0]: 243.0.381.0 Title[243.0.381.0]: International Traffic Analysis PageTop[243.0.381.0]:<h1>Traffic Analysis for IMAX 20MB 1.1 </h1> at the interface of the router I can see 20MB week cid:[email protected] Ivan Palacios Gaitan Network Operation Center- NOC Comunicaciones IBW Hospital Monte España, 1 c/al lago, 1 c/arriba. Apdo. 6078. Managua, Nicaragua. Telefono: (505) 2278-6328. Ext. 4257 Fax: (505) 2278-6370 www.ibw.com.ni -------------------------------------------------------------------------------- > _______________________________________________ > mrtg mailing list > [email protected] > https://lists.oetiker.ch/cgi-bin/listinfo/mrtg > _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
