I'm hoping someone can answer what is probably a pretty easy question. While I have been using MRTG for years, I have only recently needed to start gathering stats on 10G interfaces. I can't seem to figure out the correct syntax to identify the interface in the MRTG config file.
I use MRTG to graph around 15 of our key Cisco switches. The device in question is a Cisco WS-C4500X-16 running IOS cat4500e-universalk9.SPA.03.08.01.E.152-4.E1. On a 1Gbps interface, my target statement looks like the following, which works fine: Target[WWHS]: #Gi6/1:public@10.255.255.7:::::2 However, I have scoured the MRTG documentation and still cannot find the appropriate syntax for a 10Gbps port on the same switch. I have experimented with a number of creative names, just guesses, but none have worked. I have even tried using the interface description (as detailed in the documentation) instead of the name, but that yielded 0 output. In the past, I have found that referencing a VLAN does not seem to work on any of my Cisco switches, as it only shows Kbps of traffic rather than the Mbps/Gbps I would expect. Any advice? Rick Pummel Walla Walla Public Schools
_______________________________________________ mrtg mailing list mrtg@lists.oetiker.ch https://lists.oetiker.ch/cgi-bin/listinfo/mrtg