Edwin, Thank you for the reply. After posting this, I realized that the data I need to collect can be achieved using "vnstat" on the server itself. While I still would like to get MRTG working on the switching module, it is no longer as high a priority. I will try some of the things you suggested, in order to try and determine why this isn't working, when time allows.
I appreciate you taking time to respond. Thank you, Kenneth R. Leach -----Original Message----- From: mrtg [mailto:[email protected]] On Behalf Of Edwin A. Epstein III Sent: Tuesday, December 26, 2017 2:57 PM To: mrtg <[email protected]> Subject: Re: [mrtg] RTG not recording data on Cisco 3560 router switch module Hi Ken, Happy Holidays! Could you post the output of your cfgmaker cmd, as well as the cfgmaker cmd itself? My only though which I've encountered on different devices, is that they're storing it on an OID not enumerated in the interfaces. You should isolate that OID first with testing possibly using snmpwalk to do so. Once you've figured that out, creating a bandwidth graph isn't very hard. FFW, I've often seen cfgmaker get confused and mark an interface as operationally down, when it was actually up. Sincerely, Edwin A Epstein, III Rhinobee Internet Services 707.237.7504 ext 209 707.737.0288 Mobile ----- Original Message ----- From: "mrtg-request" <[email protected]> To: "mrtg" <[email protected]> Sent: Saturday, December 23, 2017 3:00:03 AM Subject: mrtg Digest, Vol 124, Issue 1 Send mrtg mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit https://lists.oetiker.ch/cgi-bin/listinfo/mrtg or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of mrtg digest..." Today's Topics: 1. MRTG not recording data on Cisco 3560 router switch module ([email protected]) ---------------------------------------------------------------------- Message: 1 Date: Fri, 22 Dec 2017 14:16:32 +0000 From: <[email protected]> To: <[email protected]> Subject: [mrtg] MRTG not recording data on Cisco 3560 router switch module Message-ID: <b5fbd5f4f160477988114f4c081f4...@cy1f00602mb0054.006f.mgd2.msft.net> Content-Type: text/plain; charset="us-ascii" We have a Cisco 2911 router with a 3560 switch module installed. We have MRTG collecting utilization statistics for the router but wanted to extend it to the switch module, as we were interested in utilization statistics of a single server, connected to one of the switch ports. We ran the MRTG configuration commands, as we normally do, and it generated the config. However, when we look at the MRTG web page, the switch interfaces are listed but no data is being captured. Has anyone else run into this situation? Is there anything special we need to do for this type of switch? Thank you, Kenneth R. Leach -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.oetiker.ch/pipermail/mrtg/attachments/20171222/efef8ce1/attachment-0001.html> ------------------------------ Subject: Digest Footer _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg ------------------------------ End of mrtg Digest, Vol 124, Issue 1 ************************************ (null) _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
