Sorry, just realized I have left out a few details of my setup: 1. I have an external LCD attached. 2. J6 is off 3. This is an MSP430F449 device. 4. I have 12pF caps on crystal. 5. I have moved R8 to R9 and R11 to R10 (jumpers). 6. I am powering through J5 with 3.2VDC (regulated). 7. I have three 1Mohm resistors from R33 to R23 to R13 to R03 w/ R03 connected to ground. 8. This LCD works perfectly when run w/o FET (and is leftover from a semi-mature 337 project). Ok, that should do it. Thanks -Mark
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mark Stokes Sent: Tuesday, November 26, 2002 3:47 PM To: [email protected] Subject: [Mspgcc-users] FET operation w/ External power to dev board I finally added enough parts to my dev board that I needed to use external power. But now the FET(and GDB/RProxy) is having trouble "re-taking" over the cpu. I can get it to respond if I alternatively mess w/ the external power and the JTAG connector, but this is a real pain. Is there a better solution? When I used JTAG(FET) power, the system worked perfectly. Thanks -Mark ------------------------------------------------------- This SF.net email is sponsored by: Get the new Palm Tungsten T handheld. Power & Color in a compact size! http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en _______________________________________________ Mspgcc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mspgcc-users
