Hi Kelly,
I don't think you have described what you are doing in enough detail for
me to make much sense of what you said. What is Timer A doing, and at
what time do you see 1/2 rail on the CA1 pin?
The 11x1 user guide is just the datasheet. The real detail about the
peripherals is in the MSP430x1xx family user;s guide (slau049d).
Regards,
Steve
Kelly Murray wrote:
Hi Steve,
It did look like there are two inputs, thanks for confirmation.
I do have a 11x1 user guide.
When I run the program, I don't get a timer_A interrupt,
the CA1 terminal has a 1.5v on it (.5*VCC), that doesn't seem
to make sense, it should have 3.0V on it once the cap charges,
which is as far as my code goes as yet.
Steve Underwood wrote:
Hi Kelly,
I think Fig 16-1 in the MSP430x1xx family user's guide (slau049d) is
pretty explicit. It shows there are genuinely two comparator inputs,
and the register bits you need to control to make use of them. Do you
have that document, or are you struggling with just the datasheet for
the 1121 itself? You really must have that user's guide to understand
most of the peripherals properly.
Regards,
Steve
