[Mspgcc-users] [OT] ADC12 power saving

[Garst R. Reese]

I'm using ACLOCK to trigger a sequence of conversions every 250us. This 
gives me an ADC12IFG when the sequence is complete. At present, I turn 
off ENC and ADC12 before processing the data, and then turn on ADC12 and 
ENC. There is no TimerA ISR active.
But, I'm wondering if I could use one to turn on the ADC12 and ENC. This 
would keep the ADC12 off until it was needed and save a bit of power.
Thoughts?

Thanks,
  Garst