I heve a **BIG** problem: msp430-jtag doesn't program any MSP device. I thought that problem was only on FG4619, but after several tests, it looks a more general problem. I test my programming HW (parallel FET) with an old version (the RPM cdk4msp package) and IT WORKS fine with the same board that I used to check a fresh rebuild of MSPGCC. That's quite strange, but if an old version of msp430-jtag works fine with the same FET tool on the same board that the new version can't flash, I think problem is somewhere in software. As I wrote some day ago, my MSPGCC build process stops on gdb-build stage, but I can't see any relationship with my problem, since I modified the makefile commenting out the gdb-build stage.
Somebody can drive me to a solution? Thanks in advance. -- Paolo Zebelloni C-Labs S.r.l. Via Livorno 60 - 10144 - Torino c/o Environment Park - Edificio A1 Laboratori - Livello 2 Tel. +39.011.225.7761 FAX. +39.011.225.7769 WEB: http://www.c-labs.it CONFIDENTIALITY NOTE The information contained in this transmission (and/or in any documents accompanying it) is intended for the addressee only and is privileged and confidential. Disclosure, interception, copying or any other use of this transmission by anyone other than the intended recipient is strictly prohibited. If you receive this transmission in error, please notify the sender immediately and destroy all copies. Thank you. Le informazioni contenute in questa trasmissione (e/o in qualsiasi documento allegato) hanno carattere strettamente riservato e confidenziale e sono indirizzate esclusivamente al destinatario. E' fatto divieto assoluto a chiunque altro di divulgare, intercettare, copiare o altrimenti utilizzare questa trasmissione. Qualora si riceva questa trasmissione per errore, si prega di darne avviso immediato al mittente e di distruggerne ogni copia. Grazie.
