Hi Daniel I don't have a lsusb, but a System Profiler. Before running mspdebug -j uif, I see http://dl.dropbox.com/u/5138628/FET430-before.png
After the output below, it looks like this: http://dl.dropbox.com/u/5138628/FET340-after.png Best Matthias On 08.11.2011, at 23:04, Daniel Beer wrote: > On Tue, Nov 08, 2011 at 10:29:34PM +0100, Matthias Ringwald wrote: >> thanks for releasing a new version of MSPDebug. >> >> The raw USB access to FET3410UIF is very cool. The non-official OS X driver >> for the ti3410 USB-2-UART sometimes crashes the USB subsystem for me, so I'd >> be happy with a user-space implementation. >> >> I've tried the new version on Mac OS X and get this error: >> >> $ mspdebug -j uif >> MSPDebug version 0.18 - debugging tool for MSP430 MCUs >> Copyright (C) 2009-2011 Daniel Beer <dlb...@gmail.com> >> This is free software; see the source for copying conditions. There is NO >> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. >> >> Searching for firmware for TI3410... >> - checking /sw/lib/mspdebug/ti_3410.fw.ihex >> Loaded 13765 byte firmware image (checksum = 0xb5) >> Starting download... >> Waiting for TI3410 reset... >> TI3410 device is in boot config, setting active >> ti3410: failed to set active config: Operation timed out >> ti3410: failed to open TI3410 device > > Hi Matthias, > > What happens if you wait a few seconds and try again? Does anything > change in "lsusb" before/after you try it the first time? > > Cheers, > Daniel > > -- > D.L. Beer Engineering > www.dlbeer.co.nz ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users
