No, there is is no IP assigned after boot into winpe Failed to download pxe variable file. Code(0x00000001) - in smsts.log
http://blogs.technet.com/b/smsandmom/archive/2008/08/26/configmgr-2007-osd-deployment-errors-out-within-a-few-seconds-after-winpe-loads-and-then-automatically-reboots.aspx this is the article I was looking at. Its2007 but it's the same error. From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On Behalf Of Johns, Damon (DoJ) Sent: Monday, March 31, 2014 2:36 PM To: 'mssms@lists.myitforum.com' Subject: [mssms] RE: MSSMS: Winpe drivers Intel Ethernet connection I217LM So you are seeing network information assigned to the NIC after the boot into WinPE and you have verified this by hitting F8 and doing an ipconfig, however the driver is not being injected into Windows 7 during PNP by Configuration Manager? Is that my understanding of the problem? From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com> [mailto:listsad...@lists.myitforum.com] On Behalf Of Taxter, Latisha Sent: Tuesday, 1 April 2014 8:29 AM To: mssms@lists.myitforum.com<mailto:mssms@lists.myitforum.com> Subject: [mssms] RE: MSSMS: Winpe drivers Intel Ethernet connection I217LM Sorry.. Windows 7. Boot image works with drivers already in the driver packages.. this is the only one that won't so far, so I tried adding it to the boot image. From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com> [mailto:listsad...@lists.myitforum.com] On Behalf Of Johns, Damon (DoJ) Sent: Monday, March 31, 2014 2:26 PM To: 'mssms@lists.myitforum.com' Subject: [mssms] RE: MSSMS: Winpe drivers Intel Ethernet connection I217LM Are you using with Windows 8 / 8.1 NIC driver for the I217LM in your boot image? Win PE 5.0 uses Windows 8 drivers rather than the Windows 7 drivers. From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com> [mailto:listsad...@lists.myitforum.com] On Behalf Of Taxter, Latisha Sent: Tuesday, 1 April 2014 8:23 AM To: mssms@lists.myitforum.com<mailto:mssms@lists.myitforum.com> Subject: [mssms] MSSMS: Winpe drivers Intel Ethernet connection I217LM Has anyone been able to find the winpe drivers for the NIC. I have downloaded the sccm pkg from Lenovo and the individual driver from Intel and neither works. I boot to command prompt and get Windows IP Configuration at ipconfig. The driver has been added to the boot image. Thanks. Latisha Taxter Server Administrator III Kootenai Health 2003 Kootenai Health Way Coeur D'Alene, Idaho 83814 * 208-625-4192 ?509-953-9085 ltax...@kh.org<mailto:ltax...@kh.org> http://www.kh.org [cid:image001.jpg@01CEFC06.C6A6DA30] Confidentiality Statement: The contents of this email and any attachments are confidential. They are intended for the named recipients only. If you have received this email in error, please notify the system manager or the sender immediately and do not disclose or provide copies of the contents to anyone. ________________________________ CONFIDENTIALITY NOTICE AND DISCLAIMER The information in this transmission may be confidential and/or protected by legal professional privilege, and is intended only for the person or persons to whom it is addressed. If you are not such a person, you are warned that any disclosure, copying or dissemination of the information is unauthorised. If you have received the transmission in error, please immediately contact this office by telephone, fax or email, to inform us of the error and to enable arrangements to be made for the destruction of the transmission, or its return at our cost. No liability is accepted for any unauthorised use of the information contained in this transmission. ________________________________ CONFIDENTIALITY NOTICE AND DISCLAIMER The information in this transmission may be confidential and/or protected by legal professional privilege, and is intended only for the person or persons to whom it is addressed. If you are not such a person, you are warned that any disclosure, copying or dissemination of the information is unauthorised. If you have received the transmission in error, please immediately contact this office by telephone, fax or email, to inform us of the error and to enable arrangements to be made for the destruction of the transmission, or its return at our cost. No liability is accepted for any unauthorised use of the information contained in this transmission.
<<inline: image001.jpg>>