Thanks, Mike. So you guys strictly use Windows Embedded? If you have traditional clients, how do you manage them differently?
On Wed, Mar 29, 2017 at 2:27 PM, Marable, Mike <[email protected]> wrote: > Hi Adam, > > > > 1. Maintenance Windows > > a. We use these only on our embedded devices and not on traditional > clients. We have a window set once a week (like 2 am on Sunday mornings) > so that SCCM turns off the write filter on the device, runs our deployments > and then re-enables the write filter. > > 2. Restart Behavior / Communications > > a. We actually have written our own utility to handle reboots. It > allows us to display a message to the end user, countdown timer, users can > delay the reboot, we can have it check for running executables before > attempting to reboot, etc. > > b. We have agreements in place with critical areas, such as > emergency rooms, and other 24hour clinics to limit reboots to specific days > and times. Otherwise the understanding with the users is that we will do > our deployments and maintenance outside of business hours. Combine that > with our reboot tool and the users are pretty happy. > > > > We do use WOL very heavily. Different clinics have varying office > hours/days and we have collections set up to wake machines up about 15 > minutes before the beginning of business for them. We’ve been very > successful with that. The WOL issues that we have run into in the past > have usually been attributed to either mis-configured BIOs settings or > users hard-powering off machines. > > > > Mike > > > > > > > > *From:* [email protected] [mailto:listsadmin@lists. > myitforum.com] *On Behalf Of *Adam Juelich > *Sent:* Wednesday, March 29, 2017 2:55 PM > *To:* [email protected] > *Subject:* [mssms] Maintenance Windows & Restart Behavior > > > > Hello Everyone, > > > > This isn't as much of a question as much as a poll on how people are doing > this. I know everyone is in charge of different environments, different > sizing, and other complex variables. I'd like to know what settings you > specify for the following items: > > > > 1. Maintenance Windows > > > 1. What are your MW for Windows Clients? > 2. Do you usually just do it for 'Restarts' or 'Installs' as well? > 3. Are you leveraging WoL and/or AMT? > 4. If so, what is your success rate? > > > 1. Restart Behavior > > > 1. What do you specify for the two Client Notifications? > > > 1. Communication > > > 1. How have you communicated this to end-users? It's obviously a > delicate balance between security and end-user convenience. Every > environment is different but I'm curious. > > > > Anything else that I missed in this realm, I would appreciate knowing! > > > > Thanks! > > > > ********************************************************** > Electronic Mail is not secure, may not be read every day, and should not > be used for urgent or sensitive issues > >
