Stefano Fronteddu wrote:
> Hi to all,
> I've got a problem. The video output of NMS8280 is a RGB scart. When I
> try
> to record my videos on VHS I lost quality. It seems that my VHS register in
> CVBS and not in RGB. The two devices are connected with a 21 pin scart.
> Can someone suggest to me a way to improve the quality of my video ?
> Thanks again,
>
> -------
> Fronteddu Stefano
> [EMAIL PROTECTED]
> [EMAIL PROTECTED]
> 0338/3645458
Hi Stefano,
You say that you connected the MSX and the video recorder with a 21
PIN scart, but did you check if all WIRES (especially the RGB wires)
are connected. If not, then there's your problem.
If that is not the problem, then I can only think of one other thing
that could disturb the recording, and that's 60 Hz. If your video
recorder is a PAL only video recorder it will have problems with 60 Hz
(be it NTSC or PAL). The effect you see is that you lose color or that
the image is not synchronized (it seems to shake a bit). The only
remedy for that is 50 Hz.
Good luck,
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org/
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
