Hello everyone
There are 2 MAP programms!!!
type MAP /L
if you get a partition list, then you are using the right map.com
syntax:
MAP <DRIVE> <SCSI-ID> <PARTITION>
The drive must NOT be followed by a semi-colon (:)
GReetings
[EMAIL PROTECTED]
[EMAIL PROTECTED]
>
>
>On Sat, 17 Jan 1998 [EMAIL PROTECTED] wrote:
>
>> I have tried to use MAP to switch partitions from 1 SCSI drive to
>> another, but failed. The syntax I used was:
>> MAP D: 5 2
>> D: was the 3rd partition on a harddisk on SCSI Id 0 and I wanted it
>> to swap with 2nd partition on the ZIP-drive connected on SCSI-Id 5.
>> I think that the MAP.COM I have is not correct, but because it
>> generates no messages (help or errors) and also it doesn't access the
>> ZIP-drive.
>> The filesspecs are:
>> MAP.COM size 128bytes date: 30/7/92
>> MAP.BIN size 256 date: 30/7/92
>> MAP.GEN size 714 date: 10/11/92
>> I don't know if these files are related to eachother or not, but I
>> found them on my \UTILS\DISK\ directory of the harddisk. I bought the
>> Turbo R with the Gouda SCSI and 200Mb Harddisk in one deal so I
>> didn't set up this set.
>> Can anybody verify if I have the correct program and if not send me
>> it?
>>
>> Hans-Peter Zeedijk
>
>No, you have wrong proggram. This MAP is used to patch DOS2 memory mapper
>routines, so that you can use DOS1 proggrams, that uses mapper without
>probblems. I'll send you the correct MAP proggram.
>
> ,_____.
> _=_=_=_=!_MSX_!=_=_=_=_=_=_=_=_,
> ! A1ST ~--- - I ( o o o o o o )i
> /--------------------------------`,
> / .::::::::::::::::::::::;::; ::::.,
> / :::.:.:.:::____________:::::!. -=- `,
> ~======================================
> NYYRIKKI : [EMAIL PROTECTED]
>
>
>> ****
>> MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and
put
>> in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without
the
>> quotes :-) Problems? contact [EMAIL PROTECTED]
(www.stack.nl/~wiebe/mailinglist/)
>> ****
>>
>
>****
>MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and
put
>in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
>quotes :-) Problems? contact [EMAIL PROTECTED]
(www.stack.nl/~wiebe/mailinglist/)
>****
>
>
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
