Well I have a Novaxis to on a Turbo-R and I can read all the CD-ROM's except
the two CD's that are delivered with MCCM. I think they used a different
format. To read CD's on a MSX with Novaxis you need MSXCDEX.COM And then the
syntax will be:
MSXCDEX -gscsi
Succes.
Raymond
----------------------------------------------------------------------------
------------------
Visit my MSX-homepage with the MSX-Fairlist at:
WWW.MSXFOREVER.CLUB.TIP.NL
-----Oorspronkelijk bericht-----
Van: J.P. Zeedijk <[EMAIL PROTECTED]>
Aan: '[EMAIL PROTECTED]' <[EMAIL PROTECTED]>
Datum: woensdag 20 mei 1998 9:23
Onderwerp: CD ROM aan Novaxis
>I have a Club Gouda SCSI controller with Novaxis ROM in my Turbo R with a
>200Mb harddisk.
>I experienced problems with fdisken of a ZIP disk. In the end I succeeded
>with de NFDISK programm. (It bugged with some sort of dump data in de top
>of the screen as soon as I insert a partition and also while writing the
>partitions, but after several times pressing space it worked) Is there a
>better programm for partitioning? The original FDISK programm that was with
>the NOVAXIS didn't work, or I do it wrong. The partitions gave "Error
>reading disk" errors while doing DIR. I created the partitions and after
>Writing partition data I Initialized them from the main menu of FDISK.
>
>Another problem I have with trying to access one of the CDROMs that came
>with the last issue of MCCM. I tried to use the CDROM utils from Henrik
>Gilvad from 1994. (CDDIR3.BAS, CDIR.COM, etc.) But these doesn't seem to
>work on NOVAXIS. What utilities should I use? (and where to get them?)
>
>------------------------------------------------------------------------
>---------------------------------------
>Groeten en tot Mailens
>Hans-Peter Zeedijk, Systeembeheer, [EMAIL PROTECTED]
>
>Deltion College, unit GDW
>Nijverheidsstraat 1, 8031 DZ Zwolle
>Tel: 038-4545600, fax: 038-4547421
>------------------------------------------------------------------------
>---------------------------------------
>
>****
>MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and
put
>in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
>quotes :-) Problems? contact [EMAIL PROTECTED]
(www.stack.nl/~wiebe/mailinglist/)
>****
>
>
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
