Hi Laurens
> > > Perhaps that I was confused. As far as I know, there is a Z380 project
> to
> > > build a new 32-bit MSX and another Z380 project to make a Z380 card to
> be
> > > inserted into an existing MSX. I thought that the above mentioned
> project
> > was
> > > the Z380 card project. But maybe I'm mistaken. I should better look
this
> > up
> > > in the MSX hardware list on "The MSX Plaza" ;-)
> >
> > Both are the same project. You can use z380 card with MSX or alone
as
> > part of the MMSX project.
>
> If you put a LPE Z380 card in an Evolution4 expander, and put another card
> in it with all standard MSX peripherals like VDP, PSG, Keyboard-interface,
> Joystickports, etc. Then you've got a new MSX. Such a card is now easier
to
> make since it appeared the v9958 is still available, and most other
devices
> have already been created in FPGA form by Ademir and ESE etc.
Padial is working on these boards with FPGA technology. See the others
emails from him. With only software patchs you can run your LPE-VDP Card as
a v99xx. And same with Sound board.
> However, it seems very hard to co-operate on this point.
In my opinion is very dificult.
Regards
Airam
****
Problems? contact [EMAIL PROTECTED] See also http://www.faq.msxnet.org/
****
