I got a version of SD-Snatcher somewhere that DOES work with START.COM. Anyway, if you have a turboR and have an original... use HDDEMU instead. Works fine.
Greetz, Sander ----- Original Message ----- From: "Ivan Latorre" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, December 27, 2001 19:41 Subject: Re: [2] START.COM > Francisco Alvarez wrote: > > > Ivan Latorre <[EMAIL PROTECTED]> wrote on 27/12/01 18:08:39: > > > > > >Patriek Lesparre wrote: > > > > > >> >I get this message in dutch: > > >> >SD.DSK wordt nu geladen ... > > >> > > > >> >What does it mean? > > >> > > >> SD.DSK is being loaded ... > > > > > >The computer hangs up (the led of the Sunrise IDE cartridge > > >doesn't light up, so nothing is being loaded). > > > > > >Any ideas? > > >Could it be the FAT16? I read somewhere that the CONCAT command doesn't > > >run very well with FAT16. > > > > The problem is START.COM itself. Don't try load SD Snatcher with it, it won't work ;) > > You are right. I've tried to load the first disk of SD in a FAT12 partition with START.COM (and the > FAT16 driver not installed) and it didn't work. > > So, what program should I use? (My HD has 2 partitions: one is FAT12 and the other is FAT16). > > > By the way, not all utils work with FAT16 (loading from a partition in FAT16). I didn't have problems keeping > > the driver and loading stuff from FAT12 partitions. Just you can't format floppy disks :/ > > Greets > > > -- > For info, see http://www.stack.nl/~wynke/MSX/listinfo.html > -- For info, see http://www.stack.nl/~wynke/MSX/listinfo.html