At 13:43 18-7-06 , you wrote: >Why does Fastcopy 3.0 not work on my Philips nms 8250/00? >It says my BIOS or hardware is incompatible. >I get the same error message when running it with attached IDE harddisk on >my Turbo R, but when the IDE is disconnected, it works fine. >Greetz, Hapzee
That usually means the incorrect FDC driver module isn't loaded. I your case the FDC driver module for the MSXturboR is loaded. There should be a selector file in the package to tell fastcopy it should load that particular driver file. I hope Alex will also release the format tool using those driver modules, since IIRC it also contains a routine to detect the FDC and load the correct file automatically. GreeTz, BiFi Visit my Home Page at www.bifi.msxnet.org mail me at: [EMAIL PROTECTED] FTP: ftp.bifi.msxnet.org ICQ #36126979 _______________________________________________ MSX mailing list ([email protected]) Info page: http://lists.stack.nl/mailman/listinfo/msx
