Re: [MTT users] Problems running MTT with already installed MPICH-MX

Mon, 1 Oct 2007 12:06:44 -0400

When I did the Analyze modules for AlreadyInstalled, each MPI was *slightly* different, so I didn't make a unified one. But it is possible that we could think a little harder and make it happen (I was a bit constrained for time when I did it...). 

On Sep 28, 2007, at 8:23 PM, Jelena Pjesivac-Grbovic wrote:


Yay! It worked :)

Thank you all:)

Jelena

On Fri, 28 Sep 2007, Mohamad Chaarawi wrote:


Actually this is exactly the problem... i fought with MVAPICH2 for a

while, until i figured out that there is not really a module for  
MVAPICH.



But if u use any of the others (except OMPI) as tim mentioned, it  
will

work..

Tim Mattox wrote:

This might also be a problem:

[MPI install: MPICH-MX]
mpi_get = mpich-mx
module = MPICH2



As far as I can tell, the install module should be something like  
this:

module = Analyze::MPICH


But there isn't an MPICH module for that yet...  there are ones  
for OMPI,

CrayMPI, HPMPI and IntelMPI.


The Analyze::OMPI module won't work, since it will try to use  
ompi_info...
so you can lie and say it's one of the others, or...  I'm trying  
my own hacked

Analyze::MPICH module to see if I understand how this works.

On 9/28/07, Ethan Mallove <ethan.mall...@sun.com> wrote:

Hi Jelena,

Change this line:

  alreadyinstalled_dir = /usr/local/mpich-mx/bin

To this:

  alreadyinstalled_dir = /usr/local/mpich-mx

Does that work?

-Ethan


On Thu, Sep/27/2007 10:46:55PM, Jelena Pjesivac-Grbovic wrote:

Hello,


I am trying to test the MPICH-MX using MTT on our clusters and  
I am hitting

the wall.

I was able to get Open MPI to run (did not try trunk yet - but  
nightly

builds worked).


The problem is that all phases seem to go through (including  
Test RUN and

Reported) but nothing happens.

I have attached the stripped down ini file (only with mpich-mx  
stuff)

and output of the command

   ./client/mtt --scratch /home/pjesa/mtt/scratch2 \
   --file

/home/pjesa/mtt/collective-bakeoff/samples/ompi-core-perf- 
testing_mpich-mx.ini

\
   --debug --verbose --print-time --no-section 'skampi imb osu'


I think that it must be something stupid because the almost  
same script

which downloads nightly open mpi build works.

Thanks!
Jelena
 --
Jelena Pjesivac-Grbovic -- Pjesa, Ph.D.
Graduate Research Assistant
Innovative Computing Laboratory
Computer Science Department, UTK
Claxton Complex 350
(865) 974 - 6722 (865) 974 - 6321
jpjes...@utk.edu

"The only difference between a problem and a solution is that
 people understand the solution."
                                      -- Charles Kettering

Content-Description: simplified ini file

#================================================================= 
=====

# Generic OMPI core performance testing template configuration

#================================================================= 
=====


[MTT]

# Leave this string so that we can identify this data subset in  
the

# database

# OMPI Core: Use a "test" label until we're ready to run real  
results

description = [testbake]
#description = [2007 collective performance bakeoff]

# OMPI Core: Use the "trial" flag until we're ready to run real  
results

trial = 1

# Put other values here as relevant to your environment.
#hostfile = PBS_NODEFILE
hostfile = /home/pjesa/mtt/runs/machinefile


#----------------------------------------------------------------- 
-----


[Lock]
# Put values here as relevant to your environment.


#================================================================= 
=====

# MPI get phase

#================================================================= 
=====


[MPI get: MPICH-MX]
mpi_details = MPICH-MX

module = AlreadyInstalled
alreadyinstalled_dir = /usr/local/mpich-mx/bin
alreadyinstalled_version = 1.2.7

#module = Download

#download_url = http://www.myri.com/ftp/pub/MPICH-MX/mpich- 
mx_1.2.7..5.tar.gz

## You need to obtain the username and password from Myricom
#download_username = <OBTAIN THIS FROM MYRICOM>
#download_password = <OBTAIN THIS FROM MYRICOM>


#================================================================= 
=====

# Install MPI phase

#================================================================= 
=====



#----------------------------------------------------------------- 
-----

[MPI install: MPICH-MX]
mpi_get = mpich-mx
module = MPICH2
save_stdout_on_success = 1
merge_stdout_stderr = 0


#================================================================= 
=====

# MPI run details

#================================================================= 
=====


[MPI Details: MPICH-MX]

# You may need different hostfiles for running by slot/by node.

exec = mpirun --machinefile &hostfile() -np &test_np()  
&test_executable() &test_argv()

network = mx



#================================================================= 
=====

# Test get phase

#================================================================= 
=====


[Test get: netpipe]
module = Download

download_url = http://www.scl.ameslab.gov/netpipe/code/ 
NetPIPE_3.6.2.tar.gz



#----------------------------------------------------------------- 
-----


[Test get: osu]
module = SVN
svn_url = https://svn.open-mpi.org/svn/ompi-tests/trunk/osu


#----------------------------------------------------------------- 
-----


[Test get: imb]
module = SVN
svn_url = https://svn.open-mpi.org/svn/ompi-tests/trunk/IMB_2.3


#----------------------------------------------------------------- 
-----


[Test get: skampi]
module = SVN

svn_url = https://svn.open-mpi.org/svn/ompi-tests/trunk/ 
skampi-5.0.1



#================================================================= 
=====

# Test build phase

#================================================================= 
=====


[Test build: netpipe]
test_get = netpipe
save_stdout_on_success = 1
merge_stdout_stderr = 1
stderr_save_lines = 100

module = Shell
shell_build_command = <<EOT
make mpi
EOT


#----------------------------------------------------------------- 
-----


[Test build: osu]
test_get = osu
save_stdout_on_success = 1
merge_stdout_stderr = 1
stderr_save_lines = 100

module = Shell
shell_build_command = <<EOT
make osu_latency osu_bw osu_bibw
EOT


#----------------------------------------------------------------- 
-----


[Test build: imb]
test_get = imb
save_stdout_on_success = 1
merge_stdout_stderr = 1

module = Shell
shell_build_command = <<EOT
cd src
make clean IMB-MPI1
EOT


#----------------------------------------------------------------- 
-----


[Test build: skampi]
test_get = skampi
save_stdout_on_success = 1
merge_stdout_stderr = 1
stderr_save_lines = 100

module = Shell
# Set EVERYONE_CAN_MPI_IO for HP MPI
shell_build_command = <<EOT
make CFLAGS="-O2 -DPRODUCE_SPARSE_OUTPUT -DEVERYONE_CAN_MPI_IO"
EOT


#================================================================= 
=====

# Test Run phase

#================================================================= 
=====


[Test run: netpipe]
test_build = netpipe
pass = &and(&cmd_wifexited(), &eq(&cmd_wexitstatus(), 0))
# Timeout hueristic: 10 minutes
timeout = 10:00
save_stdout_on_pass = 1

# Ensure to leave this value as "-1", or performance results  
could be lost!

stdout_save_lines = -1
merge_stdout_stderr = 1
np = 2
alloc = node

specify_module = Simple
analyze_module = NetPipe

simple_pass:tests = NPmpi


#----------------------------------------------------------------- 
-----


[Test run: osu]
test_build = osu
pass = &and(&cmd_wifexited(), &eq(&cmd_wexitstatus(), 0))
# Timeout hueristic: 10 minutes
timeout = 10:00
save_stdout_on_pass = 1

# Ensure to leave this value as "-1", or performance results  
could be lost!

stdout_save_lines = -1
merge_stdout_stderr = 1
np = 2
alloc = node

specify_module = Simple
analyze_module = OSU

simple_pass:tests = osu_bw osu_latency osu_bibw


#----------------------------------------------------------------- 
-----


[Test run: imb]
test_build = imb
pass = &and(&cmd_wifexited(), &eq(&cmd_wexitstatus(), 0))
# Timeout hueristic: 10 minutes
timeout = 10:00
save_stdout_on_pass = 1

# Ensure to leave this value as "-1", or performance results  
could be lost!

stdout_save_lines = -1
merge_stdout_stderr = 1
np = &env_max_procs()


argv = -npmin &test_np() &enumerate("PingPong", "PingPing",  
"Sendrecv", "Exchange", "Allreduce", "Reduce",  
"Reduce_scatter", "Allgather", "Allgatherv", "Alltoall",  
"Bcast", "Barrier")


specify_module = Simple
analyze_module = IMB

simple_pass:tests = src/IMB-MPI1


#----------------------------------------------------------------- 
-----


[Test run: skampi]
test_build = skampi
pass = &and(&cmd_wifexited(), &eq(&cmd_wexitstatus(), 0))
# Timeout hueristic: 10 minutes
timeout = 10:00
save_stdout_on_pass = 1

# Ensure to leave this value as "-1", or performance results  
could be lost!

stdout_save_lines = -1
merge_stdout_stderr = 1
np = &env_max_procs()

argv = -i &find("mtt_.+.ski", "input_files_bakeoff")

specify_module = Simple
analyze_module = SKaMPI

simple_pass:tests = skampi


#================================================================= 
=====

# Reporter phase

#================================================================= 
=====


[Reporter: IU database]
module = MTTDatabase

mttdatabase_realm = OMPI
mttdatabase_url = https://www.open-mpi.org/mtt/submit/

# Change this to be the username and password for your submit  
user.

# Get this from the OMPI MTT administrator.
mttdatabase_username = utk
mttdatabase_password = utk0mp1mtt
# Change this to be some short string identifying your cluster.
mttdatabase_platform = grig

mttdatabase_debug_filename = mttdb_debug_file_perf
mttdatabase_keep_debug_files = 1


#----------------------------------------------------------------- 
-----



# This is a backup reporter; it also writes results to a local  
text

# file

[Reporter: text file backup]
module = TextFile

textfile_filename = $phase-$section-$mpi_name-$mpi_version.txt

textfile_summary_header = <<EOT
Hostname: &shell("hostname")
uname: &shell("uname -a")
Username: &shell("who am i")
EOT

textfile_summary_footer =
textfile_detail_header =
textfile_detail_footer =

textfile_textwrap = 78

Content-Description: output of the MTT command

Debug is 1, Verbose is 1
*** MTT: ./client/mtt --scratch /home/pjesa/mtt/scratch2 --file

  /home/pjesa/mtt/collective-bakeoff/samples/ompi-core-perf- 
testing_mpich-m

  x.ini --debug --verbose --print-time --no-section skampi imb osu
chdir ./client
chdir /home/pjesa/mtt/collective-bakeoff
Copying:

   /home/pjesa/mtt/collective-bakeoff/samples/ompi-core-perf- 
testing_mpich-

   mx.ini to /tmp/yy79ezjkh0.ini
Reading ini file:

   /home/pjesa/mtt/collective-bakeoff/samples/ompi-core-perf- 
testing_mpich-

   mx.ini
Validating INI inifile: /tmp/yy79ezjkh0.ini

FilterINI: regexp (section=mpi get: mpich-mx): $section =~ / 
skampi/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=mpi get: mpich-mx): $section =~ /imb/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=mpi get: mpich-mx): $section =~ /osu/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)

FilterINI: regexp (section=mpi install: mpich-mx): $section =~ / 
skampi/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)

FilterINI: regexp (section=mpi install: mpich-mx): $section =~ / 
imb/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)

FilterINI: regexp (section=mpi install: mpich-mx): $section =~ / 
osu/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)

FilterINI: regexp (section=mpi details: mpich-mx): $section =~ / 
skampi/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)

FilterINI: regexp (section=mpi details: mpich-mx): $section =~ / 
imb/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)

FilterINI: regexp (section=mpi details: mpich-mx): $section =~ / 
osu/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)

FilterINI: regexp (section=test get: netpipe): $section =~ / 
skampi/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test get: netpipe): $section =~ /imb/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test get: netpipe): $section =~ /osu/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test get: osu): $section =~ /skampi/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test get: osu): $section =~ /imb/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test get: osu): $section =~ /osu/i
FilterINI: regexp (section=test get: imb): $section =~ /skampi/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test get: imb): $section =~ /imb/i

FilterINI: regexp (section=test get: skampi): $section =~ / 
skampi/i
FilterINI: regexp (section=test build: netpipe): $section =~ / 
skampi/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)

FilterINI: regexp (section=test build: netpipe): $section =~ / 
imb/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)

FilterINI: regexp (section=test build: netpipe): $section =~ / 
osu/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test build: osu): $section =~ /skampi/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test build: osu): $section =~ /imb/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test build: osu): $section =~ /osu/i
FilterINI: regexp (section=test build: imb): $section =~ /skampi/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test build: imb): $section =~ /imb/i

FilterINI: regexp (section=test build: skampi): $section =~ / 
skampi/i
FilterINI: regexp (section=test run: netpipe): $section =~ / 
skampi/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test run: netpipe): $section =~ /imb/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test run: netpipe): $section =~ /osu/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test run: osu): $section =~ /skampi/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test run: osu): $section =~ /imb/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test run: osu): $section =~ /osu/i
FilterINI: regexp (section=test run: imb): $section =~ /skampi/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: regexp (section=test run: imb): $section =~ /imb/i

FilterINI: regexp (section=test run: skampi): $section =~ / 
skampi/i
FilterINI: regexp (section=reporter: iu database): $section =~ / 
skampi/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)

FilterINI: regexp (section=reporter: iu database): $section =~ / 
imb/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)

FilterINI: regexp (section=reporter: iu database): $section =~ / 
osu/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)

FilterINI: regexp (section=reporter: text file backup):  
$section =~

   /skampi/i
FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)

FilterINI: regexp (section=reporter: text file backup):  
$section =~ /imb/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)

FilterINI: regexp (section=reporter: text file backup):  
$section =~ /osu/i

FilterINI: Delete: 0 (del on match: 1, del on mismatch: 0)
FilterINI: Final list of sections:
       [mtt]
       [lock]
       [mpi get: mpich-mx]
       [mpi install: mpich-mx]
       [mpi details: mpich-mx]
       [test get: netpipe]
       [test build: netpipe]
       [test run: netpipe]
       [reporter: iu database]
       [reporter: text file backup]
Scratch: /home/pjesa/mtt/scratch2
Making dir: /home/pjesa/mtt/scratch2 (cwd:
   /home/pjesa/mtt/collective-bakeoff)
/home/pjesa/mtt/scratch2 does not exist -- creating
chdir /home/pjesa/mtt/scratch2/
chdir /home/pjesa/mtt/collective-bakeoff
Scratch resolved: /home/pjesa/mtt/scratch2
Value: force
Making dir: /home/pjesa/mtt/scratch2/sources (cwd:
   /home/pjesa/mtt/scratch2)
/home/pjesa/mtt/scratch2/sources does not exist -- creating
chdir /home/pjesa/mtt/scratch2/sources/
chdir /home/pjesa/mtt/scratch2
Making dir: /home/pjesa/mtt/scratch2/installs (cwd:
   /home/pjesa/mtt/scratch2)
/home/pjesa/mtt/scratch2/installs does not exist -- creating
chdir /home/pjesa/mtt/scratch2/installs/
chdir /home/pjesa/mtt/scratch2
Making dir: /home/pjesa/mtt/scratch2/test_runs (cwd:
   /home/pjesa/mtt/scratch2)
/home/pjesa/mtt/scratch2/test_runs does not exist -- creating
chdir /home/pjesa/mtt/scratch2/test_runs/
chdir /home/pjesa/mtt/scratch2
Value: funclet_files
Value: hostfile
Evaluating: /home/pjesa/mtt/runs/machinefile
Replacing vars from section MTT: /home/pjesa/mtt/runs/machinefile
Got final version before escapes: /home/pjesa/mtt/runs/machinefile
Returning: /home/pjesa/mtt/runs/machinefile

Got default hostfile: /home/pjesa/mtt/runs/machinefile,  
max_np: 4

Value: hostlist
Value: max_np
Value: textwrap
Value: drain_timeout
Value: trim_save_successful
Value: trim_save_failed
Value: trial
Evaluating: 1
Replacing vars from section MTT: 1
Got final version before escapes: 1
Returning: 1
Value: http_proxy
Value: https_proxy
Value: ftp_proxy
Value: terminate_files
Value: before_all_exec
Value: before_all_exec_timeout
Value: before_all_exec_pass
Value: before_each_exec
Value: before_each_exec_timeout
Value: before_each_exec_pass
Value: after_all_exec
Value: after_all_exec_timeout
Value: after_all_exec_pass
Value: after_each_exec
Value: after_each_exec_timeout
Value: after_each_exec_pass
Value: module
Value: log_file
Value: logfile
*** Reporter initializing
Value: module
Evaluating: MTTDatabase
Replacing vars from section reporter: iu database: MTTDatabase
Got final version before escapes: MTTDatabase
Returning: MTTDatabase

Initializing reporter module: MTTDatabase

Evaluating: require MTT::Reporter::MTTDatabase
Evaluating: $ret = &MTT::Reporter::MTTDatabase::Init(@args)
Value: mttdatabase_username
Evaluating: utk
Replacing vars from section reporter: iu database: utk
Got final version before escapes: utk
Returning: utk
Value: mttdatabase_password
Evaluating: utk0mp1mtt
Replacing vars from section reporter: iu database: utk0mp1mtt
Got final version before escapes: utk0mp1mtt
Returning: utk0mp1mtt
Value: mttdatabase_url
Evaluating: https://www.open-mpi.org/mtt/submit/
Replacing vars from section reporter: iu database:
   https://www.open-mpi.org/mtt/submit/

Got final version before escapes: https://www.open-mpi.org/mtt/ 
submit/

Returning: https://www.open-mpi.org/mtt/submit/
Value: mttdatabase_realm
Evaluating: OMPI
Replacing vars from section reporter: iu database: OMPI
Got final version before escapes: OMPI
Returning: OMPI
Value: mttdatabase_email_errors_to
Value: mttdatabase_debug_filename
Evaluating: mttdb_debug_file_perf

Replacing vars from section reporter: iu database:  
mttdb_debug_file_perf

Got final version before escapes: mttdb_debug_file_perf
Returning: mttdb_debug_file_perf
Value: mttdatabase_keep_debug_files
Evaluating: 1
Replacing vars from section reporter: iu database: 1
Got final version before escapes: 1
Returning: 1
Value: mttdatabase_hostname
Value: local_username
Value: mttdatabase_platform
Evaluating: grig
Replacing vars from section reporter: iu database: grig
Got final version before escapes: grig
Returning: grig
   Set HTTP credentials for realm "OMPI"
MTTDatabase getting a client serial number...
MTTDatabase trying proxy:  / Default (none)
MTTDatabase got response:
   === client_serial = 6320 ===
MTTDatabase parsed invocation serial: 6320
Making dir: /home/pjesa/mtt/scratch2/mttdatabase-submit (cwd:
   /home/pjesa/mtt/scratch2)

/home/pjesa/mtt/scratch2/mttdatabase-submit does not exist --  
creating

chdir /home/pjesa/mtt/scratch2/mttdatabase-submit/
chdir /home/pjesa/mtt/scratch2
MTTDatabase reporter writing to debug file

   (/home/pjesa/mtt/scratch2/mttdatabase-submit/ 
mttdb_debug_file_perf)

MTTDatabase reporter initialized (OMPI, utk, XXXXXX,
   https://www.open-mpi.org:443/mtt/submit/, grig)
Value: module
Evaluating: TextFile
Replacing vars from section reporter: text file backup: TextFile
Got final version before escapes: TextFile
Returning: TextFile

Initializing reporter module: TextFile

Evaluating: require MTT::Reporter::TextFile
Evaluating: $ret = &MTT::Reporter::TextFile::Init(@args)
Value: textfile_summary_header
Evaluating: Hostname: &shell("hostname")
   uname: &shell("uname -a")
   Username: &shell("who am i")
Replacing vars from section reporter: text file backup: Hostname:
   &shell("hostname")
   uname: &shell("uname -a")
   Username: &shell("who am i")
--> Prefix now: Hostname:
--> Remaining (after &): shell("hostname")
   uname: &shell("uname -a")
   Username: &shell("who am i")
--> Found func name: shell
--> Found beginning of arguments: "hostname")
   uname: &shell("uname -a")
   Username: &shell("who am i")
--> Initial param search: "hostname")
   uname: &shell("uname -a")
   Username: &shell("who am i")
--> Loop: trimmed search: "hostname")
   uname: &shell("uname -a")
   Username: &shell("who am i")
--> Examining char: " (pos 0)
--> Found beginning quote
--> Found last quote
--> Examining char: ) (pos 10)
--> Found end of arg (pos 10)
Found argument: "hostname"
--> Remainder:
   uname: &shell("uname -a")
   Username: &shell("who am i")
--> Calling: $ret = MTT::Values::Functions::shell("hostname");
&shell: got hostname
&shell: returning grig-head
--> After eval(string), remaining: grig-head
   uname: &shell("uname -a")
   Username: &shell("who am i")
Replacing vars from section reporter: text file backup: grig-head
   uname: &shell("uname -a")
   Username: &shell("who am i")
--> Prefix now: Hostname: grig-head
   uname:
--> Remaining (after &): shell("uname -a")
   Username: &shell("who am i")
--> Found func name: shell
--> Found beginning of arguments: "uname -a")
   Username: &shell("who am i")
--> Initial param search: "uname -a")
   Username: &shell("who am i")
--> Loop: trimmed search: "uname -a")
   Username: &shell("who am i")
--> Examining char: " (pos 0)
--> Found beginning quote
--> Found last quote
--> Examining char: ) (pos 10)
--> Found end of arg (pos 10)
Found argument: "uname -a"
--> Remainder:
   Username: &shell("who am i")
--> Calling: $ret = MTT::Values::Functions::shell("uname -a");
&shell: got uname -a

&shell: returning Linux grig-head 2.6.8 #1 SMP Fri Oct 20  
17:13:21 EDT 2006

   x86_64 GNU/Linux

--> After eval(string), remaining: Linux grig-head 2.6.8 #1 SMP  
Fri Oct 20

   17:13:21 EDT 2006 x86_64 GNU/Linux
   Username: &shell("who am i")

Replacing vars from section reporter: text file backup: Linux  
grig-head

   2.6.8 #1 SMP Fri Oct 20 17:13:21 EDT 2006 x86_64 GNU/Linux
   Username: &shell("who am i")
--> Prefix now: Hostname: grig-head

   uname: Linux grig-head 2.6.8 #1 SMP Fri Oct 20 17:13:21 EDT  
2006 x86_64

   GNU/Linux
   Username:
--> Remaining (after &): shell("who am i")
--> Found func name: shell
--> Found beginning of arguments: "who am i")
--> Initial param search: "who am i")
--> Loop: trimmed search: "who am i")
--> Examining char: " (pos 0)
--> Found beginning quote
--> Found last quote
--> Examining char: ) (pos 10)
--> Found end of arg (pos 10)
Found argument: "who am i"
--> Remainder:
--> Calling: $ret = MTT::Values::Functions::shell("who am i");
&shell: got who am i

&shell: returning pjesa    pts/8      Sep 18 15:45  
(reliant.cs.utk.edu)
--> After eval(string), remaining: pjesa    pts/8      Sep 18  
15:45

   (reliant.cs.utk.edu)

Replacing vars from section reporter: text file backup: pjesa   
pts/8

     Sep 18 15:45 (reliant.cs.utk.edu)
Got final version before escapes: pjesa    pts/8      Sep 18 15:45
   (reliant.cs.utk.edu)
Returning: Hostname: grig-head

   uname: Linux grig-head 2.6.8 #1 SMP Fri Oct 20 17:13:21 EDT  
2006 x86_64

   GNU/Linux
   Username: pjesa    pts/8      Sep 18 15:45 (reliant.cs.utk.edu)
Value: textfile_summary_footer
Evaluating:
Replacing vars from section reporter: text file backup:
Got final version before escapes:
Returning:
Value: textfile_detail_header
Value: textfile_detail_footer
Value: textfile_textwrap
Evaluating: 78
Replacing vars from section reporter: text file backup: 78
Got final version before escapes: 78
Returning: 78
File reporter initialized (/home/pjesa/mtt/scratch2/)
*** Reporter initialized
Evaluating: &getenv("HOME")/mtt-stop
--> Prefix now:
--> Remaining (after &): getenv("HOME")/mtt-stop
--> Found func name: getenv
--> Found beginning of arguments: "HOME")/mtt-stop
--> Initial param search: "HOME")/mtt-stop
--> Loop: trimmed search: "HOME")/mtt-stop
--> Examining char: " (pos 0)
--> Found beginning quote
--> Found last quote
--> Examining char: ) (pos 6)
--> Found end of arg (pos 6)
Found argument: "HOME"
--> Remainder: /mtt-stop
--> Calling: $ret = MTT::Values::Functions::getenv("HOME");
&getenv(HOME) returning: /home/pjesa
--> After eval(string), remaining: /home/pjesa/mtt-stop
Got final version before escapes: /home/pjesa/mtt-stop
Returning: /home/pjesa/mtt-stop
Evaluating: &scratch_root()/mtt-stop
--> Prefix now:
--> Remaining (after &): scratch_root()/mtt-stop
--> Found func name: scratch_root
--> Found beginning of arguments: )/mtt-stop
--> Initial param search: )/mtt-stop
--> Loop: trimmed search: )/mtt-stop
--> Examining char: ) (pos 0)
--> Found end of arg (pos 0)
Found empty argument
--> Remainder: /mtt-stop
--> Calling: $ret = MTT::Values::Functions::scratch_root();
&scratch_root() returning: /home/pjesa/mtt/scratch2

--> After eval(string), remaining: /home/pjesa/mtt/scratch2/mtt- 
stop
Got final version before escapes: /home/pjesa/mtt/scratch2/mtt- 
stop

Returning: /home/pjesa/mtt/scratch2/mtt-stop
*** MPI get phase starting
chdir /home/pjesa/mtt/scratch2/sources

MPI get: [mpi get: mpich-mx]

   Checking for new MPI sources...
Value: module
Evaluating: AlreadyInstalled
Replacing vars from section mpi get: mpich-mx: AlreadyInstalled
Got final version before escapes: AlreadyInstalled
Returning: AlreadyInstalled
Value: mpi_details
Evaluating: MPICH-MX
Replacing vars from section mpi get: mpich-mx: MPICH-MX
Got final version before escapes: MPICH-MX
Returning: MPICH-MX
Value: env_module
Value: setenv
Value: unsetenv
Value: prepend_path
Value: append_path
chdir /home/pjesa/mtt/scratch2/sources

Making dir: mpi_get__mpich-mx (cwd: /home/pjesa/mtt/scratch2/ 
sources)

mpi_get__mpich-mx does not exist -- creating
chdir mpi_get__mpich-mx/
chdir /home/pjesa/mtt/scratch2/sources
chdir /home/pjesa/mtt/scratch2/sources/mpi_get__mpich-mx
Evaluating: require MTT::MPI::Get::AlreadyInstalled
Evaluating: $ret = &MTT::MPI::Get::AlreadyInstalled::Get(@args)
Value: alreadyinstalled_dir
Evaluating: /usr/local/mpich-mx/bin

Replacing vars from section mpi get: mpich-mx: /usr/local/mpich- 
mx/bin

Got final version before escapes: /usr/local/mpich-mx/bin
Returning: /usr/local/mpich-mx/bin
   Using MPI in: /usr/local/mpich-mx/bin
Value: alreadyinstalled_version
Evaluating: 1.2.7
Replacing vars from section mpi get: mpich-mx: 1.2.7
Got final version before escapes: 1.2.7
Returning: 1.2.7

MTT::MPI::Get::AlreadyInstalled complete

   Got new MPI sources: version 1.2.7
*** MPI get phase complete

Phase: MPI Get

   Started:       Thu Sep 27 22:39:37 2007
   Stopped:       Thu Sep 27 22:39:37 2007
   Elapsed:       00:00:00
   Total elapsed: 00:00:00
*** MPI install phase starting
chdir /home/pjesa/mtt/scratch2/installs

MPI install [mpi install: mpich-mx]

Value: mpi_get
Evaluating: mpich-mx
Replacing vars from section mpi install: mpich-mx: mpich-mx
Got final version before escapes: mpich-mx
Returning: mpich-mx
Checking for [mpich-mx] / [1.2.7] / [mpich-mx]
   Installing MPI: [mpich-mx] / [1.2.7] / [mpich-mx]...
chdir /home/pjesa/mtt/scratch2/installs
Unique directory: CoY6
Making dir: CoY6 (cwd: /home/pjesa/mtt/scratch2/installs)
CoY6 does not exist -- creating
chdir CoY6/
chdir /home/pjesa/mtt/scratch2/installs
chdir /home/pjesa/mtt/scratch2/installs/CoY6
Value: module
Evaluating: MPICH2
Replacing vars from section mpi install: mpich-mx: MPICH2
Got final version before escapes: MPICH2
Returning: MPICH2
Value: description
Value: description
Evaluating: [testbake]
Replacing vars from section MTT: [testbake]
Got final version before escapes: [testbake]
Returning: [testbake]
chdir /home/pjesa/mtt/scratch2/installs/CoY6
chdir ..
chdir /home/pjesa/mtt/scratch2/installs/CoY6
Sym linked: CoY6 to mpich-mx#mpich-mx#1.2.7
Value: env_module
Value: setenv
Value: unsetenv
Value: prepend_path
Value: append_path
Value: configure_arguments
Value: vpath_mode
Value: make_all_arguments
Value: make_check
Value: compiler_name
Value: compiler_version
Value: save_stdout_on_success
Evaluating: 1
Replacing vars from section mpi install: mpich-mx: 1
Got final version before escapes: 1
Returning: 1
Value: merge_stdout_stderr
Evaluating: 0
Replacing vars from section mpi install: mpich-mx: 0
Got final version before escapes: 0
Returning: 0
Value: stderr_save_lines
Value: stdout_save_lines
Running command: rm -rf src
Command complete, exit status: 0
Making dir: src (cwd: /home/pjesa/mtt/scratch2/installs/CoY6)
src does not exist -- creating
chdir src/
chdir /home/pjesa/mtt/scratch2/installs/CoY6
chdir /home/pjesa/mtt/scratch2/installs/CoY6/src
Evaluating: require MTT::MPI::Get::AlreadyInstalled
Evaluating: $ret =
   &MTT::MPI::Get::AlreadyInstalled::PrepareForInstall(@args)
chdir /home/pjesa/mtt/scratch2/installs/CoY6/src
chdir /home/pjesa/mtt/scratch2/installs/CoY6/src
Making dir: /home/pjesa/mtt/scratch2/installs/CoY6/install (cwd:
   /home/pjesa/mtt/scratch2/installs/CoY6/src)

/home/pjesa/mtt/scratch2/installs/CoY6/install does not exist  
-- creating

chdir /home/pjesa/mtt/scratch2/installs/CoY6/install/
chdir /home/pjesa/mtt/scratch2/installs/CoY6/src
Evaluating: require MTT::MPI::Install::MPICH2
Evaluating: $ret = &MTT::MPI::Install::MPICH2::Install(@args)
Value: mpich2_make_all_arguments
Value: mpich2_compiler_name
Value: bitness
Evaluating: &get_mpi_install_bitness("")
--> Prefix now:
--> Remaining (after &): get_mpi_install_bitness("")
--> Found func name: get_mpi_install_bitness
--> Found beginning of arguments: "")
--> Initial param search: "")
--> Loop: trimmed search: "")
--> Examining char: " (pos 0)
--> Found beginning quote
--> Found last quote
--> Examining char: ) (pos 2)
--> Found end of arg (pos 2)
Found argument: ""
--> Remainder:

--> Calling: $ret =  
MTT::Values::Functions::get_mpi_install_bitness("");

&get_mpi_intall_bitness
&_find_libmpi returning:
Couldn't find libmpi!
--> After eval(string), remaining: 0
Got final version before escapes: 0
Returning: 0
Value: endian
Evaluating: &get_mpi_install_endian("")
--> Prefix now:
--> Remaining (after &): get_mpi_install_endian("")
--> Found func name: get_mpi_install_endian
--> Found beginning of arguments: "")
--> Initial param search: "")
--> Loop: trimmed search: "")
--> Examining char: " (pos 0)
--> Found beginning quote
--> Found last quote
--> Examining char: ) (pos 2)
--> Found end of arg (pos 2)
Found argument: ""
--> Remainder:

--> Calling: $ret =  
MTT::Values::Functions::get_mpi_install_endian("");

&get_mpi_intall_endian
&_find_libmpi returning:
*** Could not find libmpi to calculate endian-ness
--> After eval(string), remaining: 0
Got final version before escapes: 0
Returning: 0

Found whatami: /home/pjesa/mtt/collective-bakeoff/client/ 
whatami/whatami

Value: platform_type
Value: platform_type
Value: platform_hardware
Value: platform_hardware
Value: os_name
Value: os_name
Value: os_version
Value: os_version
   Skipped MPI install
*** MPI install phase complete

Phase: MPI Install

   Started:       Thu Sep 27 22:39:37 2007
   Stopped:       Thu Sep 27 22:39:38 2007
   Elapsed:       00:00:01
   Total elapsed: 00:00:01
*** Test get phase starting
chdir /home/pjesa/mtt/scratch2/sources

Test get: [test get: netpipe]

   Checking for new test sources...
Value: module
Evaluating: Download
Replacing vars from section test get: netpipe: Download
Got final version before escapes: Download
Returning: Download
chdir /home/pjesa/mtt/scratch2/sources

Making dir: test_get__netpipe (cwd: /home/pjesa/mtt/scratch2/ 
sources)

test_get__netpipe does not exist -- creating
chdir test_get__netpipe/
chdir /home/pjesa/mtt/scratch2/sources
chdir /home/pjesa/mtt/scratch2/sources/test_get__netpipe
Evaluating: require MTT::Test::Get::Download
Evaluating: $ret = &MTT::Test::Get::Download::Get(@args)
Value: download_url

Evaluating: http://www.scl.ameslab.gov/netpipe/code/ 
NetPIPE_3.6.2.tar.gz

Replacing vars from section test get: netpipe:
   http://www.scl.ameslab.gov/netpipe/code/NetPIPE_3.6.2.tar.gz
Got final version before escapes:
   http://www.scl.ameslab.gov/netpipe/code/NetPIPE_3.6.2.tar.gz

Returning: http://www.scl.ameslab.gov/netpipe/code/ 
NetPIPE_3.6.2.tar.gz

Download got url:

   http://www.scl.ameslab.gov/netpipe/code/NetPIPE_3.6.2.tar.gz
Value: download_username
Value: download_password

MTT::FindProgram::FindProgram returning /usr/bin/wget

Running command: wget -nv
   http://www.scl.ameslab.gov/netpipe/code/NetPIPE_3.6.2.tar.gz
OUT:22:39:55

   URL:http://www.scl.ameslab.gov/netpipe/code/ 
NetPIPE_3.6.2.tar.gz

   [369585/369585] -> "NetPIPE_3.6.2.tar.gz" [1]
Command complete, exit status: 0
Value: download_version

Download complete

   Got new test sources
*** Test get phase complete

Phase: Test Get

   Started:       Thu Sep 27 22:39:38 2007
   Stopped:       Thu Sep 27 22:39:55 2007
   Elapsed:       00:00:17
   Total elapsed: 00:00:18
*** Test build phase starting
chdir /home/pjesa/mtt/scratch2/installs

Test build [test build: netpipe]

Value: test_get
Evaluating: netpipe
Replacing vars from section test build: netpipe: netpipe
Got final version before escapes: netpipe
Returning: netpipe
*** Test build phase complete

Phase: Test Build

   Started:       Thu Sep 27 22:39:55 2007
   Stopped:       Thu Sep 27 22:39:55 2007
   Elapsed:       00:00:00
   Total elapsed: 00:00:18
*** Run test phase starting

Test run [netpipe]

Value: test_build
Evaluating: netpipe
Replacing vars from section test run: netpipe: netpipe
Got final version before escapes: netpipe
Returning: netpipe
*** Run test phase complete

Phase: Test Run

   Started:       Thu Sep 27 22:39:55 2007
   Stopped:       Thu Sep 27 22:39:55 2007
   Elapsed:       00:00:00
   Total elapsed: 00:00:18

Phase: Trim

   Started:       Thu Sep 27 22:39:55 2007
   Stopped:       Thu Sep 27 22:39:55 2007
   Elapsed:       00:00:00
   Total elapsed: 00:00:18
*** Reporter finalizing
Evaluating: require MTT::Reporter::MTTDatabase
Evaluating: $ret = &MTT::Reporter::MTTDatabase::Finalize(@args)
Evaluating: require MTT::Reporter::TextFile
Evaluating: $ret = &MTT::Reporter::TextFile::Finalize(@args)
*** Reporter finalized
_______________________________________________
mtt-users mailing list
mtt-us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/mtt-users

_______________________________________________
mtt-users mailing list
mtt-us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/mtt-users







--
Mohamad Chaarawi
Instructional Assistant           http://www.cs.uh.edu/~mschaara
Department of Computer Science    University of Houston
4800 Calhoun, PGH Room 526        Houston, TX 77204, USA
_______________________________________________
mtt-users mailing list
mtt-us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/mtt-users



--
Jelena Pjesivac-Grbovic -- Pjesa, Ph.D.
Graduate Research Assistant
Innovative Computing Laboratory
Computer Science Department, UTK
Claxton Complex 350
(865) 974 - 6722
(865) 974 - 6321
jpjes...@utk.edu

"The only difference between a problem and a solution is that
  people understand the solution."
                                       -- Charles Kettering

_______________________________________________
mtt-users mailing list
mtt-us...@open-mpi.org
http://www.open-mpi.org/mailman/listinfo.cgi/mtt-users



--
Jeff Squyres
Cisco Systems


























					Reply via email to