It is found that the usbdropdir path in pcsclite is not set correctly in my computer. So I ran ./configure --enable-usbdropdir=/usr/local/pcsc/drivers, make and make install, then everything works fine. :)
Cheers,
Arthur
On 9/8/05, Arthur Chiu <[EMAIL PROTECTED]> wrote:
Hi, Thanks a lot for your reply.
I had also tried to use the ccid-0.9.3. I ran make and make install, then checked /usr/local/pcsc/drivers and the scr33xcciddriver.bundle is located there. I checked /usr/local/pcsc/drivers/ifd-ccid.bundle/Contents/Info.plist and 04e6 appears correctly in ifdvendorID and 5111 appears correctly in ifdProductID.
I have also upgraded the firmware to 6.22.
Would it have conflicts if I installed the driver provided by SCRMicro (SCR331-DI_VER_0.0.1 (for LINUX KERNEL 2.6.x)) AND ccid together?
Thanks,
ArthurOn 9/8/05, Damien Sauveron < [EMAIL PROTECTED]> wrote:Arthur Chiu a écrit :
> Would any one know what's wrong and can kindly give me suggestions on
> how to resolve this matter?
Have you try the CCID generic driver [1] of Ludovic?
If you use it, have you upgrade the firmware?
[1] http://pcsclite.alioth.debian.org/ccid.html
--
Damien
_______________________________________________
Muscle mailing list
[email protected]
http://lists.drizzle.com/mailman/listinfo/muscle
_______________________________________________ Muscle mailing list [email protected] http://lists.drizzle.com/mailman/listinfo/muscle
