Hi, None! In my opinion it makes no sense to have Sandesha2 just provide the message at the consumer EPR. What is missing in my opinion is some callback method which allows acknowledging the message and then Sandesha2 deals with the WS-RM spec.
We decided that this behaviour will also be achieved by using the HTTP OK response from the consumer (be aware to also check the response if there is some fault ;-). This provides the same functionality, if you only send the next message when the previously message was acknowledge, but avoids to have one additional framework. Best regards Matthias -----Ursprüngliche Nachricht----- Von: Kin Onn Low [mailto:[EMAIL PROTECTED] Gesendet: Mittwoch, 9. Mai 2007 02:14 An: [email protected] Betreff: RE: WS-ReliableMessaging with Muse Thanks, Matthias. I'll give it a go. You mentioned that you ended up not using Sandesha2. Which WS-RM implementation did you use instead? -----Original Message----- From: Beil, Matthias [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 08, 2007 2:56 PM To: [email protected] Subject: AW: WS-ReliableMessaging with Muse Hi, yes it is possible to use WS-RM with Muse. But it doesn't come out of the box. As Muse uses for Client communication HTTP, you have to implement some classes yourself. You have to extend the 'SimpleSubscriptionManager' class to allow for setting of a new 'SimpleSoapClient' class (configure this in muse.xml). Something like: protected NotificationConsumerClient createConsumerClient() { EndpointReference consumer = getConsumerReference(); EndpointReference producer = getProducerReference(); Environment env = getEnvironment(); // set new SOAP client // SoapClient soapClient = null; // try { // soapClient = new WsnOssjAxis2SoapClient(); // } // catch (AxisFault ex) { // // soapClient = new SimpleSoapClient(); // } SoapClient soapClient = new WsnOssjAckSoapClient(); env.setSoapClient(soapClient); NotificationConsumerClient client = new WsnOssjNotificationConsumerClient(consumer, producer, env); client.setTrace(isUsingTrace()); return client; } Then you have to create a new 'SimpleSoapClient' class where you replace the send method with something like this: public Element[] send(final EndpointReference src, final EndpointReference dest, final String wsaAction, final Element[] body, final Element[] extraHeaders) { if (LOGGER.isDebugEnabled()) { LOGGER.debug("Use constum SOAP client!"); } if (dest == null) { throw new NullPointerException("NullDestinationEPR"); } if (wsaAction == null) { throw new NullPointerException("NullActionURI"); } Element[] soapBody = body; if (soapBody == null) { soapBody = EMPTY_ARRAY; } Element[] soapHeaders = extraHeaders; if (extraHeaders == null) { soapHeaders = EMPTY_ARRAY; } // create the request message and turn it into bytes final Element soapRequest = this.createMessage(src, dest, wsaAction, soapBody, soapHeaders); if (this.isUsingTrace()) { this.trace(soapRequest, false); } // send / receive Axis2 messages try { final Options opts = new Options(); opts.setAction(wsaAction); org.apache.axis2.addressing.EndpointReference axis2Epr = new org.apache.axis2.addressing.EndpointReference( dest.getAddress().toString()); opts.setTo(axis2Epr); // axis2Epr = new // org.apache.axis2.addressing.EndpointReference(src.getAddress().toString()); // opts.setFrom(axis2Epr); // opts.setReplyTo(axis2Epr); // opts.setUseSeparateListener(true); opts.setTransportInProtocol(Constants.TRANSPORT_HTTP); opts.setProperty(Constants.Configuration.CHARACTER_SET_ENCODING, "UTF-8"); opts.setProperty(Constants.Configuration.DISABLE_SOAP_ACTION, "true"); // opts.setProperty(SandeshaClientConstants.LAST_MESSAGE, "true"); // opts.setProperty(SandeshaClientConstants.SANDESHA_LISTENER, // new SandeshaListener() { // public void onError(AxisFault fault) { // LOGGER.info("Sandesha listener SOAP fault: " // + fault.getFaultCode()); // } // // public void onTimeOut(SequenceReport report) { // LOGGER.info("Sandesha listener SOAP fault: " // + report.getSequenceID()); // } // }); this.axis2Client.setOptions(opts); // omResponse = // axis2Client.sendReceive(this.convertToAxiom(soapBody[0])); // axis2Client.sendRobust(this.convertToAxiom(soapBody[0])); this.axis2Client.sendReceiveNonBlocking(this.convertToAxiom(soapBody[0]), new TestCallback("WsnOssjTest")); // SandeshaClient.waitUntilSequenceCompleted(this.axis2Client); } catch (final AxisFault af) { LOGGER.error("Axis2 client exception caught!", af); } // don't return null, as this will cause a NPE return new Element[0]; } Then the call to the client goes via Axis2. Of course you have also to set up services.xml. This is more or less also the way to integrate Rampart. But with Rampart you can use WSS4J directly and only add the header to the soap header and then send the envelope over http. At last you should then have Sandesha2 working. There is some error which I didn't find the reason for. The SoapAction and the wsa:Action don't match, which breaks the terminationSequence call (some users on this list supposed that it has something to do with the muse-wsa module, I don't know). For the Axis2 client you can avoid setting the SoapAction by setting the following option opts.setProperty(Constants.Configuration.DISABLE_SOAP_ACTION, "true"); But for the Sandesha2 handler himself I didn't find a way. Nevertheless I didn't use Sandesha2 because you don't have a callback method at the server side. So it is not possible to acknowledge the receipt of the message yourself. Sandesha2 only guarantees that the message is received by the Sandesha2 handler, but not by the Muse consumer. I couldn't find a way to acknowledge the reception of the message myself. So I use the HTTP OK code to know on the producer side that the message was delivered and only then I send the next message. Hope this helps to get you running. If you get it working, please post your solution. Best regards Matthias -----Ursprüngliche Nachricht----- Von: Kin Onn Low [mailto:[EMAIL PROTECTED] Gesendet: Dienstag, 8. Mai 2007 05:50 An: [email protected] Betreff: WS-ReliableMessaging with Muse Hi. I'm using Muse 2.2.0 and WS-Notification deployed in Axis2. Is it possible to implement WS-ReliableMessaging for outbound notification messages generated from Muse? I'd like to make use of Sandesha2 but my understanding is that NotificationProducer does not make use of Axis2 client to send the notification messages. Thanks for your help. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
