On Tue, 2006-11-14 at 23:06 -0500, John Doe wrote:
> Michael,
>
> Ok will that lead fizzeled out because once I set up my syslogd and
> used the same command line you provided I saw no issues and I can see
> all my debug commands. I am assuming that you're starting your syslogd
> with the -O command to specify an NFS mounted file (which uses TCP and
> RPC) and not the -R command which uses UDP (which over wireless could
> lose lots of stuff).
>
> I know I'm asking lots of questions but with the strange log I have, I
> need to convince myself that what I'm looking at is actually correct
> or I'll end up going around in circles.
>
> Cheers...
>
> Sergio
>
>
Sergio,
Here's what I am getting... The log is from a fresh boot. I entered New
Live TV, and then immediately hit the up arrow on the remote. I waited
about 30 seconds, and then assumed the channel change failed, and went
into the EPG, and chose the adjacent channel from the lineup, and
selected that. Finally, I backed out of New Live TV.
dongle.bin.mvpmc.config:
=======================
TZ=EST+5EDT,M4.1.0/2,M10.5.0/2; export TZ;
echo "TZ=EST+5EDT,M4.1.0/2,M10.5.0/2; export TZ" > /etc/shell.config;
/bin/ntpclient -l -h 192.168.0.5 &
mkdir /var
mkdir /var/settings
mkdir /Video
mkdir /MP3
mount -t nfs -o tcp,nolock,rsize=4096,wsize=4096,nfsvers=3
192.168.0.5:/export/share/Music /MP3
mount -t nfs -o tcp,nolock,rsize=4096,wsize=4096,nfsvers=3
192.168.0.5:/export/share/Video /Video
mount -t nfs -o tcp,nolock,rsize=4096,wsize=4096,nfsvers=3
192.168.0.5:/export/share/mvpsettings /var/settings
mvpmc -f /etc/helvB14.fnt -s 192.168.0.4 -c 192.168.0.4
-F /var/settings/mvp-settings --web-port 80 1> /var/settings/log 2>&1 &
/var/settings/log:
==================
fnt_createfont: /etc/helvB14.pcf,0 not found
glyph_count = 756 (2f4)
def char 0 (0)
size 8960 byte1 0,34 byte2 0,255
pcf_createfont: using font /etc/helvB14.pcf
fnt_createfont: /etc/helvB18.pcf,0 not found
glyph_count = 756 (2f4)
def char 0 (0)
size 8960 byte1 0,34 byte2 0,255
pcf_createfont: using font /etc/helvB18.pcf
fnt_createfont: /etc/helvB14.fnt,0 not found
pcf_createfont: /etc/helvB14.fnt,0 not found
createfont: no font found, returning NULL
Re-starting to convince aspect ratio stuff to work...
HIDE: 0 len 53 label 'Parents - Shows'
HIDE: 1 len 37 label 'Parents - Movies'
HIDE: 2 len 20 label 'Kids - Shows'
HIDE: 3 len 7 label 'LiveTV'
loaded config file
child pid 84
MediaMVP Media Center
Version 0.3.1
Mon Oct 23 21:02:48 EDT 2006HIDE: 0 len 53 label 'Parents - Shows'
HIDE: 1 len 37 label 'Parents - Movies'
HIDE: 2 len 20 label 'Kids - Shows'
HIDE: 3 len 7 label 'LiveTV'
loaded config file
child exited cleanly
child pid 85
MediaMVP Media Center
Version 0.3.1
Mon Oct 23 21:02:48 EDT 2006fnt_createfont: /etc/helvB14.pcf,0 not found
glyph_count = 756 (2f4)
def char 0 (0)
size 8960 byte1 0,34 byte2 0,255
pcf_createfont: using font /etc/helvB14.pcf
fnt_createfont: /etc/helvB18.pcf,0 not found
glyph_count = 756 (2f4)
def char 0 (0)
size 8960 byte1 0,34 byte2 0,255
pcf_createfont: using font /etc/helvB18.pcf
fnt_createfont: /etc/helvB14.fnt,0 not found
pcf_createfont: /etc/helvB14.fnt,0 not found
createfont: no font found, returning NULL
createfont: (height == 0) found builtin font System (0)
createfont: (height == 0) found builtin font System (0)
NTSC mode, 720x480
screen is 720 x 480
Initializing PAT Decoder
approximate heap size 692224
audio write thread started (pid 87)
Allocated 4194304 heap bytes
Allocated guard page
mpeg read thread started (pid 88)
video write thread started (pid 89)
audio thread started (pid 90)
Demux size video: 2097152 audio: 524288
Setting WSS aspect to: 8
mythtv control thread sleeping...(pid 96)
myth watchdog thread started (pid 97)
Starting new livetv
Starting New Live TV!
screensaver enable
mclient:Starting mclient pthread.
web server thread started (pid 95)
expose on unknown wid 2
switch_gui_state(): changing from 1 to 2
show busy widget
event thread started (pid 98)
switch_hw_state(): changing from 1 to 2
MythTV event RECORDING_LIST_CHANGErecorder framerate is 29.97
Changing to aspect 0, afd 0
Video aspect reported as ZERO - not changing setting
fullscreen video mode
fullscreen video mode
Got stream recorder = 0x10602bf4, file = (nil))
mythtv control thread starting...(pid 96)
audio write thread running
video write thread running
screensaver enable
screensaver disable
screensaver enable
screensaver disable
control_start(): starting rec playback
auto detection transport stream returned 0
Changing to aspect 2, afd -1
Source video aspect ratio: 4:3
Setting WSS aspect to: 8
selected audio stream 0xc0
switch to MPEG audio output device
hide busy widget
show busy widget
video write thread sleeping...
audio write thread sleeping...
Freeing PAT Decoder
Initializing PAT Decoder
mpeg read thread sleeping...
Freeing PAT Decoder
Initializing PAT Decoder
Setting WSS aspect to: 8
Changing to aspect 2, afd -1
Source video aspect ratio: 4:3
Setting WSS aspect to: 8
request block failed
request block failed
request block failed
request block failed
request block failed
request block failed 0
control_start(): len 0 playing_via_mythtv 1 close_mythtv 0
mythtv control thread sleeping...(pid 96)
Got stream recorder = 0x10602bf4, file = (nil))
mythtv control thread starting...(pid 96)
request block failed
request block failed
video write thread running
audio write thread running
auto detection transport stream returned 0
hide busy widget
screensaver disable
switch to MPEG audio output device
control_start(): starting rec playback
In video_callback showing guide 59
show busy widget
audio write thread sleeping...
video write thread sleeping...
Freeing PAT Decoder
Initializing PAT Decoder
mpeg read thread sleeping...
Freeing PAT Decoder
Initializing PAT Decoder
Setting WSS aspect to: 8
av_move(0,0,0): mythtv_channel_set [src/mythtv_livetv.c,770]
Changing to aspect 2, afd -1
Source video aspect ratio: 4:3
Setting WSS aspect to: 8
request block failed
request block failed
request block failed
request block failed 0
control_start(): len 0 playing_via_mythtv 1 close_mythtv 0
mythtv control thread sleeping...(pid 96)
Got stream recorder = 0x10602bf4, file = (nil))
mythtv control thread starting...(pid 96)
request block failed
Stopping Live TV
audio write thread running
video write thread running
hide busy widget
control_start(): starting rec playback
screensaver enable
back_to_guide_menu(): 641
show busy widget
Freeing PAT Decoder
Initializing PAT Decoder
mpeg read thread sleeping...
video write thread sleeping...
Freeing PAT Decoder
Initializing PAT Decoder
<snip .. lots of these>
Freeing PAT Decoder
Initializing PAT Decoder
Setting WSS aspect to: 8
request block failed
control_start(): len 1 playing_via_mythtv 0 close_mythtv 0
mythtv control thread sleeping...(pid 96)
mythtv_atexit(): start exit processing...
mythtv_atexit(): end exit processing...
Thanks,
--Matt
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Mvpmc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mvpmc-users
mvpmc wiki: http://mvpmc.wikispaces.com/
