Tom Metro-10 wrote: > > But this raises a related question: you're running two DHCP servers on > your network? What are you doing to prevent conflicts? >
Nothing specific. Both the router and the computer are set to give the MVP the same address. If that's all it needs when it renews the lease, then I don't know why it wouldn't work with either one. Sometimes when I pull the plug on the MVP it doesn't load right, presumably because it listens to the router instead of the computer, but normally it works without issue. Roger Heflin-2 wrote: > > router says "wrong network" and ignores it. To debug it better, make > sure > that your router is setup to send log information someplace (though if > your > main computer is off you may have to just have no dhcp on the main > computer to > It's a Netgear WGR614v5. I don't see any way of getting any logs other than the content filtering ones. I think I'll try two things for now. One is get the backend up with DHCP running before starting the MVP up and see if that makes a difference. Also, I'll try to extend the lease time to see if that helps. I guess it will take two days since that's the way I get it to fail! When doing a soft power on, it gives the status screen and a progress bar and a bunch of tasks flash on the screen. Does anyone know what the first task shown is? I don't know if it's related to that or what goes on before the tasks start flashing. John -- View this message in context: http://www.nabble.com/startup-failures-after-backend-shutdown-tp15143662s24861p15174539.html Sent from the MediaMVP Media Center - Users mailing list archive at Nabble.com. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Mvpmc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mvpmc-users mvpmc wiki: http://mvpmc.wikispaces.com/
