threads or connections ? if the problem is about connection maybe change the parameter in your my.cnf :
max_connections = 1024 to a higher value ... Hope this helps... Saludos / Regards, Alvaro. On Wed, 2004-11-17 at 11:18 -0800, Matt Babineau wrote: > From: > Matt Babineau > <[EMAIL PROTECTED]> > To: > [EMAIL PROTECTED] > Subject: > RE: MySQL 4.0.2 is topping out at > 1024 threads! > Date: > Wed, 17 Nov 2004 11:18:04 -0800 > (16:18 CLST) > > This is a very strange problem. As you can see there isn't a lot going > on, > under a million queries. No problem right? This is a dual cpu 2.8 Ghz > server. Ok Great. I am also including my.cnf so you can see my > configuration. > > Here is some more info on the problem I am experiencing: > > mysql> status > -------------- > mysql Ver 12.22 Distrib 4.0.20, for pc-linux (i686) > > Connection id: 25394 > Current database: > Current user: [EMAIL PROTECTED] > SSL: Not in use > Current pager: stdout > Using outfile: '' > Server version: 4.0.20-standard-log > Protocol version: 10 > Connection: 63.12.130.192 via TCP/IP > Client characterset: latin1 > Server characterset: latin1 > TCP port: 3306 > Uptime: 19 hours 40 min 2 sec > > Threads: 1023 Questions: 781971 Slow queries: 0 Opens: 33 Flush > tables: > 1 Open tables: 27 Queries per second avg: 11.044 > -------------- > > mysql> > > > ============================================== > > # Example mysql config file for very large systems. > # > # This is for large system with memory of 1G-2G where the system runs > mainly > # MySQL. > # > # You can copy this file to > # /etc/my.cnf to set global options, > # mysql-data-dir/my.cnf to set server-specific options (in this > # installation this directory is /var/lib/mysql) or > # ~/.my.cnf to set user-specific options. > # > # One can in this file use all long options that the program supports. > # If you want to know which options a program support, run the program > # with --help option. > > # The following options will be passed to all MySQL clients > [client] > #password = your_password > port = 3306 > socket = /var/lib/mysql/mysql.sock > > # Here follows entries for some specific programs > > # The MySQL server > [mysqld] > port = 3306 > socket = /var/lib/mysql/mysql.sock > skip-locking > key_buffer = 384M > max_allowed_packet = 1M > table_cache = 512 > connect_timeout = 10 > sort_buffer_size = 2M > read_buffer_size = 2M > myisam_sort_buffer_size = 64M > thread_cache = 8 > query_cache_size = 32M > # Try number of CPU's*2 for thread_concurrency > thread_concurrency = 4 > max_connections = 1024 > max_user_connections = 1024 > > # Don't listen on a TCP/IP port at all. This can be a security > enhancement, > # if all processes that need to connect to mysqld run on the same > host. > # All interaction with mysqld must be made via Unix sockets or named > pipes. > # Note that using this option without enabling named pipes on Windows > # (via the "enable-named-pipe" option) will render mysqld useless! > # > #skip-networking > > # Replication Master Server (default) > # binary logging is required for replication > log-bin > > # required unique id between 1 and 2^32 - 1 > # defaults to 1 if master-host is not set > # but will not function as a master if omitted > server-id = 1 > > # Replication Slave (comment out master section to use this) > # > # To configure this host as a replication slave, you can choose > between > # two methods : > # > # 1) Use the CHANGE MASTER TO command (fully described in our manual) > - > # the syntax is: > # > # CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>, > # MASTER_USER=<user>, MASTER_PASSWORD=<password> ; > # > # where you replace <host>, <user>, <password> by quoted strings > and > # <port> by the master's port number (3306 by default). > # > # Example: > # > # CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306, > # MASTER_USER='joe', MASTER_PASSWORD='secret'; > # > # OR > # > # 2) Set the variables below. However, in case you choose this method, > then > # start replication for the first time (even unsuccessfully, for > example > # if you mistyped the password in master-password and the slave > fails to > # connect), the slave will create a master.info file, and any later > # change in this file to the variables' values below will be > ignored and > # overridden by the content of the master.info file, unless you > shutdown > # the slave server, delete master.info and restart the slaver > server. > # For that reason, you may want to leave the lines below untouched > # (commented) and instead use CHANGE MASTER TO (see above) > # > # required unique id between 2 and 2^32 - 1 > # (and different from the master) > # defaults to 2 if master-host is set > # but will not function as a slave if omitted > #server-id = 2 > # > # The replication master for this slave - required > #master-host = <hostname> > # > # The username the slave will use for authentication when connecting > # to the master - required > #master-user = <username> > # > # The password the slave will authenticate with when connecting to > # the master - required > #master-password = <password> > # > # The port the master is listening on. > # optional - defaults to 3306 > #master-port = <port> > # > # binary logging - not required for slaves, but recommended > #log-bin > > # Point the following paths to different dedicated disks > #tmpdir = /tmp/ > #log-update = /path-to-dedicated-directory/hostname > > # Uncomment the following if you are using BDB tables > #bdb_cache_size = 384M > #bdb_max_lock = 100000 > > # Uncomment the following if you are using InnoDB tables > #innodb_data_home_dir = /var/lib/mysql/ > #innodb_data_file_path = ibdata1:2000M;ibdata2:10M:autoextend > #innodb_log_group_home_dir = /var/lib/mysql/ > #innodb_log_arch_dir = /var/lib/mysql/ > # You can set .._buffer_pool_size up to 50 - 80 % > # of RAM but beware of setting memory usage too high > #innodb_buffer_pool_size = 384M > #innodb_additional_mem_pool_size = 20M > # Set .._log_file_size to 25 % of buffer pool size > #innodb_log_file_size = 100M > #innodb_log_buffer_size = 8M > #innodb_flush_log_at_trx_commit = 1 > #innodb_lock_wait_timeout = 50 > > [mysqldump] > quick > max_allowed_packet = 16M > > [mysql] > no-auto-rehash > # Remove the next comment character if you are not familiar with SQL > #safe-updates > > [isamchk] > key_buffer = 256M > sort_buffer_size = 256M > read_buffer = 2M > write_buffer = 2M > > [myisamchk] > key_buffer = 256M > sort_buffer_size = 256M > read_buffer = 2M > write_buffer = 2M > > [mysqlhotcopy] > interactive-timeout > > > > > Thanks All! > > > > > Matt Babineau > Web Developer > Criticalcode - http://www.criticalcode.com > > -----Original Message----- > From: Dan Nelson [mailto:[EMAIL PROTECTED] > Sent: Wednesday, November 17, 2004 8:26 AM > To: Gleb Paharenko > Cc: [EMAIL PROTECTED] > Subject: Re: MySQL 4.0.2 is topping out at 1024 threads! > > In the last episode (Nov 17), Gleb Paharenko said: > > > Help! I can't figure out a way to stop my server from topping out > at > > > 1024 threads. This is a very strange behavoir. I have tons of > legit > > > use on my database server but I don't think the threads are dying > > > does anyone have any suggestions for this? > > > > Similar problems are often found in lists. Usually they are solved > by > > increasing file limits. You likely need to increase > open-files-limit. > > If you're running Linux, you may need to recompile your linuxthreads > library > also: > > http://dev.mysql.com/doc/mysql/en/Source_notes-Linux.html > > -- > Dan Nelson > [EMAIL PROTECTED] > > -- > MySQL General Mailing List > For list archives: http://lists.mysql.com/mysql > To unsubscribe: > http://lists.mysql.com/[EMAIL PROTECTED] > > > -- > MySQL General Mailing List > For list archives: http://lists.mysql.com/mysql > To unsubscribe: > http://lists.mysql.com/[EMAIL PROTECTED] > > > -- Alvaro Avello <[EMAIL PROTECTED]> Servinco S.A.