On Monday 25 September 2006 20:09, George Law wrote: > damn outlook! > > fire up perl's CPAN interface: > > perl -MCPAN -eshell > > > cpan> i /mysql/ > ... > Bundle Bundle::DBD::mysql (C/CA/CAPTTOFU/DBD-mysql-3.0007.tar.gz) > ... > cpan> install Bundle::DBD::mysql
Hello again... I'm back to this problem I had over a year ago. Yesterday I had to reinstall my system, since the disk containint the OS crashed. After a few hours I was back in businness again - except for the Perl module. My perl scripts does not work anymore. I have tried to install the Bundle::DBD::mysql, but it failes with the same error I had last time (see below). Somehow I managed to fix this the last time, but I forgot to write down what I did (shame on me). So... is there any kind soul out there that can give me some hints about how to fix this problem? Output when installing the bundle: -------------------------------------------------------------- cpan> install Bundle::DBD::mysql DBI is up to date. Data::ShowTable is up to date. Running install for module Mysql Running make for R/RU/RUDY/DBD-mysql-2.9008.tar.gz CPAN: Digest::MD5 loaded ok CPAN: Compress::Zlib loaded ok Checksum for /root/.cpan/sources/authors/id/R/RU/RUDY/DBD-mysql-2.9008.tar.gz ok Scanning cache /root/.cpan/build for sizes DBD-mysql-2.9008/ DBD-mysql-2.9008/t/ DBD-mysql-2.9008/t/60leaks.t DBD-mysql-2.9008/t/40listfields.t DBD-mysql-2.9008/t/10dsnlist.t DBD-mysql-2.9008/t/40numrows.t DBD-mysql-2.9008/t/30insertfetch.t DBD-mysql-2.9008/t/00base.t DBD-mysql-2.9008/t/insertid.t DBD-mysql-2.9008/t/50commit.t DBD-mysql-2.9008/t/40nulls.t DBD-mysql-2.9008/t/dbdadmin.t DBD-mysql-2.9008/t/lib.pl DBD-mysql-2.9008/t/20createdrop.t DBD-mysql-2.9008/t/mysql.dbtest DBD-mysql-2.9008/t/40bindparam.t DBD-mysql-2.9008/t/mysql.t DBD-mysql-2.9008/t/40blobs.t DBD-mysql-2.9008/t/akmisc.t DBD-mysql-2.9008/t/50chopblanks.t DBD-mysql-2.9008/t/ak-dbd.t DBD-mysql-2.9008/t/mysql2.t DBD-mysql-2.9008/lib/ DBD-mysql-2.9008/lib/DBD/ DBD-mysql-2.9008/lib/DBD/mysql/ DBD-mysql-2.9008/lib/DBD/mysql/GetInfo.pm DBD-mysql-2.9008/lib/DBD/mysql/INSTALL.pod DBD-mysql-2.9008/lib/DBD/mysql.pm DBD-mysql-2.9008/lib/Bundle/ DBD-mysql-2.9008/lib/Bundle/DBD/ DBD-mysql-2.9008/lib/Bundle/DBD/mysql.pm DBD-mysql-2.9008/lib/Mysql/ DBD-mysql-2.9008/lib/Mysql/Statement.pm DBD-mysql-2.9008/lib/Mysql.pm DBD-mysql-2.9008/TODO DBD-mysql-2.9008/myld DBD-mysql-2.9008/constants.h DBD-mysql-2.9008/dbdimp.c DBD-mysql-2.9008/dbdimp.h DBD-mysql-2.9008/README DBD-mysql-2.9008/MANIFEST.SKIP DBD-mysql-2.9008/Makefile.PL DBD-mysql-2.9008/META.yml DBD-mysql-2.9008/INSTALL.html DBD-mysql-2.9008/ChangeLog DBD-mysql-2.9008/MANIFEST DBD-mysql-2.9008/mysql.xs Removing previously used /root/.cpan/build/DBD-mysql-2.9008 CPAN.pm: Going to build R/RU/RUDY/DBD-mysql-2.9008.tar.gz I will use the following settings for compiling and testing: cflags (mysql_config) = -I/usr/include/mysql -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -fno-strict-aliasing libs (mysql_config) = -L/usr/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm -L/usr/lib -lssl -lcrypto mysql_config (guessed ) = mysql_config nocatchstderr (default ) = 0 nofoundrows (default ) = 0 ssl (guessed ) = 1 testdb (default ) = test testhost (default ) = testpassword (default ) = testsocket (default ) = testuser (default ) = To change these settings, see 'perl Makefile.PL --help' and 'perldoc INSTALL'. Checking if your kit is complete... Looks good Using DBI 1.48 (for perl 5.008006 on x86_64-linux-thread-multi) installed in /usr/lib64/perl5/vendor_perl/5.8.6/x86_64-linux-thread-multi/auto/DBI/ Writing Makefile for DBD::mysql cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm cp lib/Mysql.pm blib/lib/Mysql.pm cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod cp lib/Mysql/Statement.pm blib/lib/Mysql/Statement.pm cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm gcc -c -I/usr/lib64/perl5/vendor_perl/5.8.6/x86_64-linux-thread-multi/auto/DBI/ -I/usr/include/mysql -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -fno-strict-aliasing -DDBD_MYSQL_WITH_SSL -DDBD_MYSQL_INSERT_ID_IS_GOOD -g -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m64 -mtune=nocona -DVERSION=\"2.9008\" -DXS_VERSION=\"2.9008\" -fPIC "-I/usr/lib64/perl5/5.8.6/x86_64-linux-thread-multi/CORE" dbdimp.c dbdimp.c:1: error: CPU you selected does not support x86-64 instruction set make: *** [dbdimp.o] Error 1 /usr/bin/make -- NOT OK Running make test Can't test without successful make Running make install make had returned bad status, install seems impossible Running install for module DBD::mysql Running make for R/RU/RUDY/DBD-mysql-2.9008.tar.gz Is already unwrapped into directory /root/.cpan/build/DBD-mysql-2.9008 Has already been processed within this session Running make test Can't test without successful make Running make install make had returned bad status, install seems impossible Bundle summary: The following items in bundle Bundle::DBD::mysql had installation problems: Mysql DBD::mysql [EMAIL PROTECTED] ~]# uname -a Linux jedi.dahl-stamnes.net 2.6.11-1.1369_FC4 #1 Thu Jun 2 22:56:33 EDT 2005 x86_64 x86_64 x86_64 GNU/Linux -- Jørn Dahl-Stamnes homepage: http://www.dahl-stamnes.net/dahls/ -- MySQL General Mailing List For list archives: http://lists.mysql.com/mysql To unsubscribe: http://lists.mysql.com/[EMAIL PROTECTED]
