Dear MySQL users, MySQL Server 5.4.3-beta, a new version of the popular Open Source Database Management System, has been released.
Bear in mind that this is a beta release, and as with any other pre-production release, caution should be taken when installing on production level systems or systems with critical data. For production level systems using 5.1, we would like to direct your attention to the product description of MySQL Enterprise at: http://mysql.com/products/enterprise/ MySQL 5.4 is based on MySQL 5.1 but includes several high-impact changes to address scalability and performance issues in MySQL Server. These changes exploit advances in hardware and CPU design and enable better utilization of existing hardware. MySQL 5.4 currently has Beta status. For an overview of what's new in MySQL 5.4, please see http://dev.mysql.com/doc/refman/5.4/en/news-5-4-x.html For information on installing MySQL 5.4.3 on new servers, please see the MySQL installation documentation at http://dev.mysql.com/doc/refman/5.4/en/installing.html For upgrading from previous MySQL releases, please see the important upgrade considerations at http://dev.mysql.com/doc/mysql-5.4-features/en/index.html Some other pointers you might like to follow are http://dev.mysql.com/doc/refman/5.4/en/mysql-nutshell.html http://dev.mysql.com/doc/refman/5.4/en/configuration-changes-5-4.html http://dev.mysql.com/doc/refman/5.4/en/upgrading-from-previous-series.html MySQL Server is available in source and binary form for a number of platforms from our download pages at http://dev.mysql.com/downloads/ Not all mirror sites may be up to date at this point in time, so if you can't find this version on some mirror, please try again later or choose another download site. We welcome and appreciate your feedback, bug reports, bug fixes, patches, etc.: http://forge.mysql.com/wiki/Contributing The following section lists the changes in the MySQL source code since the previous released version of MySQL 5.4. It may also be viewed online at http://dev.mysql.com/doc/refman/5.4/en/news-5-4-3.html Enjoy! Timothy Smith The MySQL build team at Sun Microsystems ========== Functionality added or changed: * Incompatible Change: If you upgrade to MySQL 5.4.3 from an earlier 5.4 release, the server may fail to start due to changes in the default values of innodb_log_files_in_group and innodb_log_file_size, which differ from those in earlier 5.4 releases. You should discard the old InnoDB log files and let MySQL 5.4.3 create new ones. It is necessary to shut down your current server cleanly so that no outstanding transaction information remains in the log. The procedure to use depends on the value of innodb_fast_shutdown used in your current server: + If innodb_fast_shutdown is not set to 2: Stop your current MySQL server and make sure that it shuts down without errors (to ensure that there is no information for outstanding transactions in the log). Copy the old log files into a safe place in case something went wrong during the shutdown and you need them to recover the tablespace. Delete the old log files and edit my.cnf if necessary to specify the desired log file configuration. Then upgrade to MySQL 5.4.3 and start the new server. mysqld sees that no InnoDB log files exist at startup and creates new ones. + If innodb_fast_shutdown is set to 2: Shut down your current server, set innodb_fast_shutdown to 1, and restart the server. The server should be allowed to recover. Then you should shut down the server again and follow the procedure described in the preceding item to change InnoDB log file size. Set innodb_fast_shutdown back to 2 and start the MySQL 5.4.3 server. * Incompatible Change: The following list indicates InnoDB configuration changes in MySQL 5.4.3, compared to previous versions of MySQL 5.4. For a description of cumulative changes in MySQL 5.4 compared to MySQL 5.1, see Section 1.4.1, "What Is New in MySQL 5.4." The default value of these system variables was changed: Variable Change in default value innodb_autoextend_increment From 64MB to 8MB innodb_buffer_pool_size From 1GB to 128MB innodb_log_buffer_size From 16MB to 8MB innodb_log_file_size From 128MB to 5MB innodb_log_files_in_group From 3 to 2 innodb_read_io_threads From 8 to 4 innodb_write_io_threads From 8 to 4 These default value changes in most cases revert changes made in earlier MySQL 5.4 releases. The result is that the defaults are more similar to those in MySQL 5.1. * On Linux (and perhaps other systems), the performance of MySQL Server can be improved by using a different malloc() implementation, developed by Google and called tcmalloc. The gain is noticeable with a higher number of simultaneous users. MySQL 5.4.1 was linked against this library, which improved performance but imposed some restrictions. As a result of these restrictions, MySQL 5.4.3 uses a different approach: + The server is linked against the default malloc() provided by the respective platform. + Binary distributions for Linux include libtcmalloc_minimal.so (a shared library that can be linked against at runtime) in pkglibdir (that is, the same directory within the package where server plugins and similar object files are located). The version of tcmalloc included with MySQL 5.4.3 comes from google-perftools 1.4. If you want to try tcmalloc but are using a binary distribution for a non-Linux platform or a source distribution, you can install Google's tcmalloc. Some distributions provide it in a google-perftools package or with a similar name, or you can download it from Google at http://code.google.com/p/google-perftools/ and compile it yourself. + mysqld_safe now supports a --malloc-lib option that enables administrators to specify that mysqld should use tcmalloc. The --malloc-lib option works by modifying the LD_PRELOAD environment value to affect dynamic linking to enable the loader to find the memory-allocation library when mysqld runs: + If the option is not given, or is given without a value (--malloc-lib=), LD_PRELOAD is not modified and no attempt is made to use tcmalloc. + If the option is given as --malloc-lib=tcmalloc, mysqld_safe looks for a tcmalloc library in /usr/lib and then in the MySQL pkglibdir location (for example, /usr/local/mysql/lib or whatever is appropriate). If tmalloc is found, its path name is added to the beginning of the LD_PRELOAD value for mysqld. If tcmalloc is not found, mysqld_safe aborts with an error. + If the option is given as --malloc-lib=/path/to/some/library, that full path is added to the beginning of the LD_PRELOAD value. If the full path points to a nonexistent or unreadable file, mysqld_safe aborts with an error. + For cases where mysqld_safe adds a path name to LD_PRELOAD, it adds the path to the beginning of any existing value the variable already has. As a result of the preceding changes, Linux users can use the libtcmalloc_minimal.so now included in binary packages by adding these lines to the my.cnf file: [mysqld_safe] malloc-lib=tcmalloc Those lines also suffice for users on any platform who have installed a tcmalloc package in /usr/lib. To use a specific tcmalloc library, specify its full path name. Example: [mysqld_safe] malloc-lib=/opt/lib/libtcmalloc_minimal.so (Bug#47549: http://bugs.mysql.com/47549) Bugs fixed: * Performance: For MyISAM tables with bulk_insert_buffer_size values larger than 256KB, the performance of bulk insert operations such as multiple-row INSERT and INSERT ... SELECT operations has been improved greatly when up to a hundred rows are inserted at the same time. (Bug#44723: http://bugs.mysql.com/44723) * Partitioning: Replication: Attempting to replicate an INSERT ... SELECT statement on a partitioned table using row-based replication caused the slave to crash. (Bug#44108: http://bugs.mysql.com/44108) * Partitioning: When reorganizing partitions, not all affected subpartitions were removed prior to renaming. One way in which the issue was visible was that attempting to reorganize two partitions into a single partition having the same name as one of the original partitions could lead to a crash of the server. (Bug#47029: http://bugs.mysql.com/47029) See also Bug#45961: http://bugs.mysql.com/45961, Bug#43729: http://bugs.mysql.com/43729. * Partitioning: An INSERT ... SELECT statement on an empty partition of a partitioned table failed with ERROR 1030 (HY000): Got error 124 from storage engine. This issue also caused queries run against a partitioned table while a LOAD DATA CONCURRENT INFILE statement was in progress to fail with the same error. (Bug#46639: http://bugs.mysql.com/46639) See also Bug#35845: http://bugs.mysql.com/35845, Bug#44657: http://bugs.mysql.com/44657, Bug#45840: http://bugs.mysql.com/45840. * Partitioning: An online or fast ALTER TABLE of a partitioned table could leave behind temporary files in the database directory. (Bug#46483: http://bugs.mysql.com/46483) * Partitioning: A partitioned table having a TIMESTAMP column with a default value of CURRENT_TIMESTAMP and this column was not defined using an ON UPDATE option, an ALTER TABLE ... REORGANIZE PARTITION statement on the table caused the TIMESTAMP column value to be set to CURRENT_TIMESTAMP regardless. (Bug#46478: http://bugs.mysql.com/46478) * Partitioning: Partition pruning did not always work correctly when the table's partitioning key used the TO_DAYS() function. (Bug#46362: http://bugs.mysql.com/46362) * Partitioning: Inserting negative values into an AUTO_INCREMENT column of a partitioned table could lead to apparently unrelated errors or a crash of the server. (Bug#45823: http://bugs.mysql.com/45823) * Partitioning: Attempting to access a partitioned table when partitioning support was disabled in a MySQL server binary that had been compiled with partitioning support caused the server to crash. (Bug#39893: http://bugs.mysql.com/39893) * Partitioning: Unnecessary calls were made in the server code for performing bulk inserts on partitions for which no inserts needed to be made. (Bug#35845: http://bugs.mysql.com/35845) See also Bug#35843: http://bugs.mysql.com/35843. * Partitioning: The use of TO_DAYS() in the partitioning expression led to selection failures when the column having the date value contained invalid dates. This occurred because the function returns NULL in such cases, and the partition containing NULL values was pruned away. For example, this problem occurred if '2001-02-00' was inserted into a DATE column of such a table, and a subsequent query on this table used WHERE date_col < '2001-02-00' --- while '2001-01-01' is less than '2001-02-00', TO_DAYS('2001-02-00') evaluates as NULL, and so the row containing '2001-01-01' was not returned. Now, for tables using RANGE or LIST partitioning and having TO_DAYS() in the partitioning expression, the NULL partition is also scanned instead of being ignored. The fix for this issue also corrects misbehavior such that a query of the form SELECT * FROM table WHERE date_col < date_val on a table partitioned by RANGE or LIST was handled as though the server SQL mode included ALLOW_INVALID_DATES even if this was not actually part of the server SQL mode at the time the query was issued. (Bug#20577: http://bugs.mysql.com/20577) See also Bug#18198: http://bugs.mysql.com/18198, Bug#32021: http://bugs.mysql.com/32021, Bug#46362: http://bugs.mysql.com/46362. * Replication: Performing a multi-row update of the AUTO_INCREMENT column of a transactional table could result in an inconsistency between master and slave when there was a trigger on the transactional table that updated a non-transactional table. When such an update failed on the master, no rows were updated on the master, but some rows could (erroneously) be updated on the slave. (Bug#46864: http://bugs.mysql.com/46864) * Replication: When using the --replicate-rewrite-db option and the database referenced by this option on the master was the current database when the connection to the slave was closed, any temporary tables existing in this database were not properly dropped. (Bug#46861: http://bugs.mysql.com/46861) * Replication: When a statement that changed both transactional and non-transactional tables failed, the transactional changes were automatically rolled back on the master but the slave ignored the error and did not roll them back, thus leading to inconsistencies between master and slave. This issue is fixed by automatically rolling back a statement that fails on the slave; however, the transaction is not rolled back unless a corresponding ROLLBACK statement is found in the relay log file. (Bug#46130: http://bugs.mysql.com/46130) See also Bug#33864: http://bugs.mysql.com/33864. * Replication: When using row-based replication, importing a dump made with mysqldump and replicating a row with an AUTO_INCREMENT column set to 0, with NO_AUTO_VALUE_ON_ZERO active on the master, the row was inserted successfully on the master; however any setting for NO_AUTO_VALUE_ON_ZERO was ignored on the slave. When the AUTO_INCREMENT column was incremented, this caused replication to fail on the slave due to a duplicate key error. In some cases it could also cause the slave to crash. (Bug#45999: http://bugs.mysql.com/45999) * Replication: When slave_transaction_retries is set, a statement that replicates, but is then rolled back due to a deadlock on the slave, should be retried. However, in certain cases, replication was stopped with error 1213 (Deadlock found when trying to get lock; try restarting transaction) instead, even when this variable was set. (Bug#45694: http://bugs.mysql.com/45694) * Replication: The binary logging behavior (and thus, the replication behavior) of CREATE DATABASE IF NOT EXISTS, CREATE TABLE IF NOT EXISTS, and CREATE EVENT IF NOT EXISTS was not consistent among these statements, nor with that of DROP DATABASE IF EXISTS, DROP TABLE IF EXISTS, and DROP EVENT IF EXISTS: A DROP ... IF EXISTS statement is always logged even if the database object named in the statement does not exist. However, of the CREATE ... IF NOT EXISTS statements, only the CREATE EVENT IF NOT EXISTS statement was logged when the database object named in the statement already existed. Now, every CREATE ... IF NOT EXISTS statement is written to the binary log (and thus replicated), whether the database object named in the statement exists or not. For more information, see Section 16.3.1.3, "Replication of CREATE ... IF NOT EXISTS Statements." Exception. Replication and logging of CREATE TABLE IF NOT EXISTS ... SELECT continues to be handled according to existing rules. See Section 16.3.1.4, "Replication of CREATE TABLE ... SELECT Statements," for more information. (Bug#45574: http://bugs.mysql.com/45574) * Replication: When using statement-based replication, database-level character sets were not always honored by the replication SQL thread. This could cause data inserted on the master using LOAD DATA to be replicated using the wrong character set. Note This was not an issue when using row-based replication. (Bug#45516: http://bugs.mysql.com/45516) * Replication: In some cases, a STOP SLAVE statement could cause the replication slave to crash. This issue was specific to MySQL on Windows or Macintosh platforms. (Bug#45238: http://bugs.mysql.com/45238, Bug#45242: http://bugs.mysql.com/45242, Bug#45243: http://bugs.mysql.com/45243, Bug#46013: http://bugs.mysql.com/46013, Bug#46014: http://bugs.mysql.com/46014, Bug#46030: http://bugs.mysql.com/46030) See also Bug#40796: http://bugs.mysql.com/40796. * Replication: Creating a scheduled event whose DEFINER clause was either set to CURRENT_USER or not set explicitly caused the master and the slave to become inconsistent. This issue stems from the fact that, in both cases, the DEFINER is set to the CURRENT_USER of the current thread. (On the master, the CURRENT_USER is the mysqld user; on the slave, the CURRENT_USER is empty.) This behavior has been modified as follows: + If CURRENT_USER is used as the DEFINER, it is replaced with the value of CURRENT_USER before the CREATE EVENT statement is written to the binary log. + If the definer is not set explicitly, a DEFINER clause using the value of CURRENT_USER is added to the CREATE EVENT statement before it is written to the binary log. (Bug#44331: http://bugs.mysql.com/44331) See also Bug#42217: http://bugs.mysql.com/42217. * Replication: When using the statement-based logging format, the only possible safe combination of transactional and non-transactional statements within the same transaction is to perform any updates on non-transactional tables (such as MyISAM tables) first, before updating any transactional tables (such as those using the InnoDB storage engine). This is due to the fact that, although a modification made to a non-transactional table is immediately visible to other connections, the update is not immediately written to the binary log, which can lead to inconsistencies between master and slave. (Other combinations may hide a causal dependency, thus making it impossible to write statements updating non-transactional tables to the binary log in the correct order.) However, in some cases, this situation was not handled properly, and the determination whether a given statement was safe or not under these conditions was not always correct. In particular, a multi-table update that affected both transactional and non-transactional tables or a statement modifying data in a non-transactional table having a trigger that operated on a transactional table (or the reverse) was not determined to be unsafe when it should have been. With this fix, the following determinations regarding replication safety are made when combining updates to transactional and non-transactional tables within the same transaction in statement-based logging mode: 1. Any statement modifying data in a non-transactional table within a given transaction is considered safe if it is issued prior to any data modification statement accessing a transactional table within the same transaction. 2. A statement that updates transactional tables only is always considered safe. 3. A statement affecting both transactional and non-transactional tables within a transaction is always considered unsafe. It is not necessary that both tables be modified for this to be true; for example, a statement such as INSERT INTO innodb_table SELECT * FROM myisam_table is also considered unsafe. Note The current fix is valid only when using statement-based logging mode; we plan to address similar issues occurring when using the MIXED or ROW format in a future MySQL release. (Bug#28976: http://bugs.mysql.com/28976) * The ARCHIVE storage engine lost records during a bulk insert. (Bug#46961: http://bugs.mysql.com/46961) * CONCAT_WS() could return incorrect results due to an argument buffer also being used as a result buffer. (Bug#46815: http://bugs.mysql.com/46815) * Stack overflow checking did not account for the size of the structure stored in the heap. (Bug#46807: http://bugs.mysql.com/46807) * The server crashed when re-using outer column references in correlated subqueries when the enclosing query used a temp table. (Bug#46791: http://bugs.mysql.com/46791) * The server could crash for queries with the following elements: 1. An "impossible where" in the outermost SELECT; 2. An aggregate in the outermost SELECT; 3. A correlated subquery with a WHERE clause that includes an outer field reference as a top-level WHERE sargable predicate; (Bug#46749: http://bugs.mysql.com/46749) * Assertion failure could result from repeated execution of a stored procedure containing an incorrect query with a subselect. (Bug#46629: http://bugs.mysql.com/46629) * CREATE TABLE ... SELECT could cause assertion failure if a table already existed with the same name and contained an AUTO_INCREMENT column. (Bug#46616: http://bugs.mysql.com/46616) * SHOW CREATE TRIGGER for a MERGE table trigger caused an assertion failure. (Bug#46614: http://bugs.mysql.com/46614) * In queries for which the loose index scan access method was chosen, using a condition of the form col_name rather than the equivalent col_name <> 0 caused an assertion failure. (Bug#46607: http://bugs.mysql.com/46607) * The server ignored the setting of sync_frm for CREATE TABLE ... LIKE. (Bug#46591: http://bugs.mysql.com/46591) * TRUNCATE TABLE for a table that was opened with HANDLER did not close the handler and left it in an inconsistent state that could lead to a server crash. Now TRUNCATE TABLE for a table closes all open handlers for the table. (Bug#46456: http://bugs.mysql.com/46456) * An attempt to create a table with the same name as an existing view could cause a server crash. (Bug#46384: http://bugs.mysql.com/46384) * A parser problem prevented properly stripping backquotes from an argument to a user-defined function (UDF). If the UDF was in an ORDER BY clause, its name would not be properly resolved against an alias with the same name in the select list. (Bug#46259: http://bugs.mysql.com/46259) * A query containing a subquery in the FROM clause and PROCEDURE ANALYSE() caused a server crash. (Bug#46184: http://bugs.mysql.com/46184) * Certain SELECT statements containing DISTINCT, GROUP BY, and HAVING clauses could hang in an infinite loop. (Bug#46159: http://bugs.mysql.com/46159) * Killing a query that was performing a sort could result in a memory leak. (Bug#45962: http://bugs.mysql.com/45962) * A Valgrind error when opening the init_file file was corrected. (Bug#45894: http://bugs.mysql.com/45894) * CREATE TEMPORARY TABLE failed for InnoDB tables on systems with case-insensitive file systems when lower_case_table_names = 2 and the pathname of the temporary file directory contained uppercase characters. (Bug#45638: http://bugs.mysql.com/45638) * Truncation of DECIMAL values could lead to assertion failures; for example, when deducing the type of a table column from a literal DECIMAL value. (Bug#45261: http://bugs.mysql.com/45261) * Debug builds of the server on Windows crashed in debugging code. (Bug#45118: http://bugs.mysql.com/45118) * The default value of innodb_buffer_pool_size was set to 1GB in MySQL 5.4.0. This was too large for many installations, so the default has been lowered to 128MB. (Bug#44408: http://bugs.mysql.com/44408) * SHOW ERRORS returned an empty result set after an attempt to drop a nonexistent table. (Bug#42364: http://bugs.mysql.com/42364) * A test for stack growth failed on some platforms, leading to server crashes. (Bug#42213: http://bugs.mysql.com/42213) * A buffer overflow could occur during handling of IS NULL ranges. (Bug#37044: http://bugs.mysql.com/37044) * mysqladmin --wait ping crashed on Windows systems. (Bug#35132: http://bugs.mysql.com/35132) * myisamchk performed parameter value casting at startup that generated unnecessary warning messages. (Bug#33785: http://bugs.mysql.com/33785) * When using the ARCHIVE storage engine, SHOW TABLE STATUS displayed incorrect information for Max_data_length, Data_length and Avg_row_length. (Bug#29203: http://bugs.mysql.com/29203) -- MySQL General Mailing List For list archives: http://lists.mysql.com/mysql To unsubscribe: http://lists.mysql.com/mysql?unsub=arch...@jab.org
