Jurgen-- Strange thing is, I had been able to build MySQL 4.0 - up until 3 days ago - without any problem. All from the same Mysql development tree. At some point, the whole thing just fell apart after a source update.
Also, there's no problem building v3.23 on the same box! It actually looks like some sort of configuration issue, with some config files gotten out of sync, but I can't be certain about this.. Thanks for the tip, though... Actually, I've been using gcc 2.96 for quite some time now, including building MySQL 4.0.x that is in production now (just had to use the new fulltext search features) - without any known issues... That's why I got somewhat too comfortable using v2.96... Regards, Vadim. crashke wrote: > > Hi Vadim, I don't know but have you read the instructions on the > Mysql-website? > > To determine if you should be concerned about this compiler issue, execute > gcc -v from the command prompt on your system. If the compiler reports > version 2.96, then there is a problem (this is the case, for example on RH > 7.x series or Mandrake 8.x). In this case, you should not try to compile > your own binary before downgrading to one of the compilers mentioned above. > You should also NOT use the MySQL server provided with your distribution -- > as this copy of MySQL was compiled with the same ill-advised compiler > version. > > I've seen your files and its reporting you have a 2.96 compiler > > greetings > > Jurgen Campforts > Meidoornlaan 2/1 > 2200 Herentals > 0496/60.25.75 > http://www.scnoorderwijk.be > http://crashke.no-ip.biz > > -----Oorspronkelijk bericht----- > Van: Vadim P. [mailto:[EMAIL PROTECTED]] > Verzonden: donderdag 9 mei 2002 23:07 > Aan: [EMAIL PROTECTED] > Onderwerp: Re: Help! Error building 4.0.2 under RH Linux 7.2 > > Just tried building Mysql-3.x.x cloned from the Development Tree on the same > machine - works like a charm. Still no luck with 4.0.2.... > Is there any known issue regarding building 4.0.2 under RedHat7.2? > > Thanks, > Vadim. > > "Vadim P." wrote: > > > > The Dev. Tree Source MySQL 4.0 no longer builds on this machine, giving > lots > > of errors. Had been able to build from the same source w/o any problems up > > until a few days ago, when I 'bk resync'ed the source. Any ideas? > > > > Thanks for your help! > > > > -------------------------------------------------------------------------- > > A snapshot of build transcript. Invoked by ./BUILD/compile-pentium. > > -------------------------------------------------------------------------- > > > > [sql]# make > > Making all in share > > make[1]: Entering directory `/root/mysql-4.0/sql/share' > > make[1]: Nothing to be done for `all'. > > make[1]: Leaving directory `/root/mysql-4.0/sql/share' > > make[1]: Entering directory `/root/mysql-4.0/sql' > > gcc -DMYSQL_SERVER > > -DDEFAULT_MYSQL_HOME="\"/usr/local/mysql\"" > > -DDATADIR="\"/usr/local/mysql/var\"" > > -DSHAREDIR="\"/usr/local/mysql/share/mysql\"" > > -DHAVE_CONFIG_H > > -I../innobase/include -I./../include > > -I./../regex -I. -I../include -I. > > -O3 -DDBUG_OFF -Wimplicit -Wreturn-type -Wid-clash-51 -Wswitch -Wtrigraphs > > -Wcomment -W -Wchar-subscripts -Wformat > > -Wimplicit-function-dec -Wimplicit-int -Wparentheses -Wsign-compare > > -Wwrite-strings -Woverloaded-virtual -Wextern-inline > > -Wsign-promo -Wreorder -Wctor-dtor-privacy -Wnon-virtual-dtor > > -felide-constructors -fno-exceptions -fno-rtti > > -mcpu=pentiumpro -O3 -fno-omit-frame-pointer -fno-implicit-templates > > -fno-exceptions -fno-rtti -c mysqld.cc > > cc1plus: warning: Ignoring command line option '-Wimplicit-function-dec' > > cc1plus: warning: Ignoring command line option '-Wimplicit-int' > > mysqld.cc: In function `void *handle_connections_sockets (void *)': > > mysqld.cc:2425: warning: `my_socket new_sock' might be used > > uninitialized in this function > > mysqld.cc: At top level: > > mysqld.cc:3045: `disconnect_slave_event_count' was not declared in this > > scope > > mysqld.cc:3046: `disconnect_slave_event_count' was not declared in this > > scope > > mysqld.cc:3050: `abort_slave_event_count' was not declared in this > > scope > > mysqld.cc:3050: `abort_slave_event_count' was not declared in this > > scope > > mysqld.cc:3053: `max_binlog_dump_events' was not declared in this scope > > mysqld.cc:3053: `max_binlog_dump_events' was not declared in this scope > > mysqld.cc:3056: `opt_sporadic_binlog_dump_fail' was not declared in > > this scope > > mysqld.cc:3057: `opt_sporadic_binlog_dump_fail' was not declared in > > this scope > > mysqld.cc:3299: `OPT_INNODB_MIRRORED_LOG_GROUPS' was not declared in > > this scope > > mysqld.cc:3304: `OPT_INNODB_LOG_FILES_IN_GROUP' was not declared in > > this scope > > mysqld.cc:3308: `OPT_INNODB_LOG_FILE_SIZE' was not declared in this > > scope > > mysqld.cc:3312: `OPT_INNODB_LOG_BUFFER_SIZE' was not declared in this > > scope > > mysqld.cc:3316: `OPT_INNODB_BUFFER_POOL_SIZE' was not declared in this > > scope > > mysqld.cc:3320: `OPT_INNODB_ADDITIONAL_MEM_POOL_SIZE' was not declared > > in this scope > > mysqld.cc:3325: `OPT_INNODB_FILE_IO_THREADS' was not declared in this > > scope > > mysqld.cc:3329: `OPT_INNODB_LOCK_WAIT_TIMEOUT' was not declared in this > > scope > > mysqld.cc:3333: `OPT_INNODB_THREAD_CONCURRENCY' was not declared in > > this scope > > mysqld.cc:3337: `OPT_INNODB_FORCE_RECOVERY' was not declared in this > > scope > > make[1]: *** [mysqld.o] Error 1 > > make[1]: Leaving directory `/root/mysql-4.0/sql' > > make: *** [all-recursive] Error 1 > > > > ------------------------------------------------------------------ > > ./configure output: > > ------------------------------------------------------------------ > > > > loading cache ./config.cache > > checking host system type... i686-pc-linux-gnu > > checking target system type... i686-pc-linux-gnu > > checking build system type... i686-pc-linux-gnu > > checking for a BSD compatible install... (cached) /usr/bin/install -c > > checking whether build environment is sane... yes > > checking whether make sets ${MAKE}... (cached) yes > > checking for working aclocal... found > > checking for working autoconf... found > > checking for working automake... found > > checking for working autoheader... found > > checking for working makeinfo... found > > checking whether to enable maintainer-specific portions of Makefiles... no > > checking whether build environment is sane... yes > > checking whether make sets ${MAKE}... (cached) yes > > checking for gawk... (cached) gawk > > checking for gcc... (cached) gcc > > checking whether the C compiler (gcc ) works... yes > > checking whether the C compiler (gcc ) is a cross-compiler... no > > checking whether we are using GNU C... (cached) yes > > checking whether gcc accepts -g... (cached) yes > > checking for c++... (cached) gcc > > checking whether the C++ compiler (gcc ) works... yes > > checking whether the C++ compiler (gcc ) is a cross-compiler... no > > checking whether we are using GNU C++... (cached) yes > > checking whether gcc accepts -g... (cached) yes > > checking how to run the C preprocessor... (cached) gcc -E > > checking C Compiler version... gcc 2.96 > > checking C++ compiler version... gcc 2.96 > > checking for ranlib... (cached) ranlib > > checking for ld used by GCC... (cached) /usr/bin/ld > > checking if the linker (/usr/bin/ld) is GNU ld... (cached) yes > > checking for BSD-compatible nm... (cached) /usr/bin/nm -B > > checking whether ln -s works... (cached) yes > > loading cache ./config.cache within ltconfig > > checking for object suffix... o > > checking for executable suffix... (cached) no > > checking for gcc option to produce PIC... -fPIC > > checking if gcc PIC flag -fPIC works... yes > > checking if gcc supports -c -o file.o... yes > > checking if gcc supports -c -o file.lo... yes > > checking if gcc supports -fno-rtti -fno-exceptions ... yes > > checking if gcc static flag -static works... -static > > checking if the linker (/usr/bin/ld) is GNU ld... yes > > checking whether the linker (/usr/bin/ld) supports shared libraries... yes > > checking command to parse /usr/bin/nm -B output... ok > > checking how to hardcode library paths into programs... immediate > > checking for /usr/bin/ld option to reload object files... -r > > checking dynamic linker characteristics... Linux ld.so > > checking if libtool supports shared libraries... yes > > checking whether to build shared libraries... yes > > checking whether to build static libraries... yes > > checking for objdir... .libs > > creating libtool > > loading cache ./config.cache > > checking for a BSD compatible install... /usr/bin/install -c > > checking for bison... (cached) bison -y > > checking for pdftex... no > > checking return type of sprintf... int > > checking for uname... (cached) /bin/uname > > checking operating system... (cached) Linux > > checking if we should use skip-locking as default for linux-gnu... yes > > checking for ln... (cached) /bin/ln > > checking for ln... (cached) /bin/ln > > checking for mv... (cached) /bin/mv > > checking for rm... (cached) /bin/rm > > checking for cp... (cached) /bin/cp > > checking for sed... (cached) /bin/sed > > checking for cmp... (cached) /usr/bin/cmp > > checking for chmod... (cached) /bin/chmod > > checking for hostname... (cached) /bin/hostname > > checking for gnutar... (cached) gtar > > checking for perl... (cached) /usr/bin/perl > > checking for ps... (cached) /bin/ps > > checking how to check if pid exists... /bin/ps p $$PID | grep mysqld > > > /dev/null > > checking for kill... (cached) /bin/kill > > checking for kill switches... /bin/kill -0 $$PID > /dev/null 2> /dev/null > > checking for gcc option to accept ANSI C... (cached) > > checking if we should use assembler functions... no > > checking if we should use RAID... no > > checking if we should should enable LOAD DATA LOCAL by default... no > > checking for getconf... (cached) getconf > > checking for CFLAGS value to request large file support... (cached) > > -D_FILE_OFFSET_BITS=64 > > checking for LDFLAGS value to request large file support... (cached) > > checking for LIBS value to request large file support... (cached) > > checking for _FILE_OFFSET_BITS... (cached) 64 > > checking for _LARGEFILE_SOURCE... (cached) no > > checking for _LARGE_FILES... (cached) no > > checking for ANSI C header files... (cached) yes > > checking for size_t... (cached) yes > > checking for dirent.h that defines DIR... (cached) yes > > checking for opendir in -ldir... (cached) no > > checking for ANSI C header files... (cached) yes > > checking for sys/wait.h that is POSIX.1 compatible... (cached) yes > > checking for fcntl.h... (cached) yes > > checking for float.h... (cached) yes > > checking for floatingpoint.h... (cached) no > > checking for ieeefp.h... (cached) no > > checking for limits.h... (cached) yes > > checking for memory.h... (cached) yes > > checking for pwd.h... (cached) yes > > checking for select.h... (cached) no > > checking for stdlib.h... (cached) yes > > checking for stddef.h... (cached) yes > > checking for strings.h... (cached) yes > > checking for string.h... (cached) yes > > checking for synch.h... (cached) no > > checking for sys/mman.h... (cached) yes > > checking for sys/socket.h... (cached) yes > > checking for netinet/in.h... (cached) yes > > checking for arpa/inet.h... (cached) yes > > checking for sys/timeb.h... (cached) yes > > checking for sys/types.h... (cached) yes > > checking for sys/un.h... (cached) yes > > checking for sys/vadvise.h... (cached) no > > checking for sys/wait.h... (cached) yes > > checking for term.h... (cached) yes > > checking for unistd.h... (cached) yes > > checking for utime.h... (cached) yes > > checking for sys/utime.h... (cached) no > > checking for termio.h... (cached) yes > > checking for termios.h... (cached) yes > > checking for sched.h... (cached) yes > > checking for crypt.h... (cached) yes > > checking for alloca.h... (cached) yes > > checking for sys/ioctl.h... (cached) yes > > checking for floor in -lm... (cached) yes > > checking for gethostbyname_r in -lnsl_r... (cached) no > > checking for gethostbyname_r in -lnsl... (cached) yes > > checking for gethostbyname_r... (cached) yes > > checking for setsockopt... (cached) yes > > checking for yp_get_default_domain... (cached) yes > > checking for p2open... (cached) no > > checking for p2open in -lgen... (cached) no > > checking for bind... (cached) yes > > checking for crypt in -lcrypt... (cached) yes > > checking for crypt... (cached) yes > > checking if libz with compress... (cached) yes > > checking for atomic operations... atomic_add atomic_sub > > checking if we should use pstack... no > > checking for int8... no > > checking LinuxThreads... Found > > checking named thread libs:... -lpthread > > checking for strtok_r in -lpthread... (cached) yes > > checking for strtok_r... (cached) yes > > checking for dlopen in -ldl... (cached) yes > > checking for restartable system calls... (cached) yes > > checking need of special linking flags... -rdynamic > > checking for working const... (cached) yes > > checking for inline... (cached) inline > > checking for off_t... (cached) yes > > checking for st_rdev in struct stat... (cached) yes > > checking whether time.h and sys/time.h may both be included... (cached) > yes > > checking whether struct tm is in sys/time.h or time.h... (cached) time.h > > checking size of char... (cached) 1 > > checking size of int... (cached) 4 > > checking size of long... (cached) 4 > > checking size of long long... (cached) 8 > > checking size of off_t... (cached) 8 > > checking whether byte ordering is bigendian... (cached) no > > checking base type of last arg to accept... (cached) socklen_t > > checking stack direction for C alloca... (cached) -1 > > checking for working alloca.h... (cached) yes > > checking for alloca... (cached) yes > > checking if struct timespec has a ts_sec member... (cached) no > > checking if we have tzname variable... (cached) yes > > checking for type ulong... (cached) yes > > checking for type uchar... (cached) no > > checking for type uint... (cached) yes > > checking for type fp_except... (cached) no > > checking if gcc supports bool types... (cached) yes > > checking if conversion of longlong to float works... (cached) yes > > checking if pthread_yield takes zero arguments... (cached) yes > > checking if pthread_yield takes 1 argument... (cached) no > > checking for varargs.h... (cached) yes > > checking for stdarg.h... (cached) yes > > checking for dirent.h... (cached) yes > > checking for locale.h... (cached) yes > > checking for ndir.h... (cached) no > > checking for sys/dir.h... (cached) yes > > checking for sys/file.h... (cached) yes > > checking for sys/ndir.h... (cached) no > > checking for sys/ptem.h... (cached) no > > checking for sys/pte.h... (cached) no > > checking for sys/select.h... (cached) yes > > checking for sys/stream.h... (cached) no > > checking for sys/mman.h... (cached) yes > > checking for curses.h... (cached) yes > > checking for termcap.h... (cached) yes > > checking for termio.h... (cached) yes > > checking for termbits.h... (cached) no > > checking for asm/termbits.h... (cached) yes > > checking for grp.h... (cached) yes > > checking for paths.h... (cached) yes > > checking for lstat... (cached) yes > > checking for putenv... (cached) yes > > checking for select... (cached) yes > > checking for setenv... (cached) yes > > checking for setlocale... (cached) yes > > checking for strcoll... (cached) yes > > checking for tcgetattr... (cached) yes > > checking whether stat file-mode macros are broken... (cached) no > > checking return type of signal handlers... (cached) void > > checking for type of signal functions... (cached) posix > > checking whether programs are able to redeclare getpw functions... > (cached) > > yes > > checking for TIOCGWINSZ in sys/ioctl.h... (cached) yes > > checking for FIONREAD in sys/ioctl.h... (cached) yes > > checking for TIOCSTAT in sys/ioctl.h... (cached) no > > checking if struct dirent has a d_ino member... (cached) yes > > checking whether signal handlers are of type void... (cached) yes > > (cached) checking for termcap functions library... -lncurses > > checking for unistd.h... (cached) yes > > checking for getpagesize... (cached) yes > > checking for working mmap... (cached) yes > > checking return type of signal handlers... (cached) void > > checking return type of qsort... (cached) void > > checking whether utime accepts a null argument... (cached) yes > > checking for vprintf... (cached) yes > > checking for alarm... (cached) yes > > checking for bmove... (cached) no > > checking for chsize... (cached) no > > checking for ftruncate... (cached) yes > > checking for rint... (cached) yes > > checking for finite... (cached) yes > > checking for isnan... (cached) yes > > checking for fpsetmask... (cached) no > > checking for fpresetsticky... (cached) no > > checking for cuserid... (cached) yes > > checking for fcntl... (cached) yes > > checking for fconvert... (cached) no > > checking for poll... (cached) yes > > checking for getrusage... (cached) yes > > checking for getpwuid... (cached) yes > > checking for getcwd... (cached) yes > > checking for getrlimit... (cached) yes > > checking for getwd... (cached) yes > > checking for index... (cached) yes > > checking for stpcpy... (cached) yes > > checking for locking... (cached) no > > checking for longjmp... (cached) yes > > checking for perror... (cached) yes > > checking for pread... (cached) yes > > checking for realpath... (cached) yes > > checking for readlink... (cached) yes > > checking for rename... (cached) yes > > checking for socket... (cached) yes > > checking for strnlen... (cached) yes > > checking for madvise... (cached) yes > > checking for mkstemp... (cached) yes > > checking for strtol... (cached) yes > > checking for strtoul... (cached) yes > > checking for strtoll... (cached) yes > > checking for strtoull... (cached) yes > > checking for snprintf... (cached) yes > > checking for tempnam... (cached) yes > > checking for thr_setconcurrency... (cached) no > > checking for gethostbyaddr_r... (cached) yes > > checking for gethostbyname_r... (cached) yes > > checking for getpwnam... (cached) yes > > checking for bfill... (cached) no > > checking for bzero... (cached) yes > > checking for bcmp... (cached) yes > > checking for strstr... (cached) yes > > checking for strpbrk... (cached) yes > > checking for strerror... (cached) yes > > checking for tell... (cached) no > > checking for atod... (cached) no > > checking for memcpy... (cached) yes > > checking for memmove... (cached) yes > > checking for setupterm... (cached) no > > checking for strcasecmp... (cached) yes > > checking for sighold... (cached) yes > > checking for vidattr... (cached) no > > checking for lrand48... (cached) yes > > checking for localtime_r... (cached) yes > > checking for sigset... (cached) yes > > checking for sigthreadmask... (cached) no > > checking for pthread_sigmask... (cached) yes > > checking for pthread_setprio... (cached) no > > checking for pthread_setprio_np... (cached) no > > checking for pthread_setschedparam... (cached) yes > > checking for pthread_attr_setprio... (cached) no > > checking for pthread_attr_setschedparam... (cached) yes > > checking for pthread_attr_create... (cached) no > > checking for pthread_getsequence_np... (cached) no > > checking for pthread_attr_setstacksize... (cached) yes > > checking for pthread_condattr_create... (cached) no > > checking for rwlock_init... (cached) no > > checking for pthread_rwlock_rdlock... (cached) yes > > checking for fchmod... (cached) yes > > checking for getpass... (cached) yes > > checking for getpassphrase... (cached) no > > checking for initgroups... (cached) yes > > checking for mlockall... (cached) yes > > checking for fseeko... (cached) yes > > checking for dlopen... (cached) yes > > checking for dlerror... (cached) yes > > checking style of gethost* routines... (cached) other > > checking style of gethostname_r routines... (cached) glibc2 > > checking 3 argument to gethostname_r routines... (cached) char > > checking args to pthread_getspecific... (cached) POSIX > > checking args to pthread_mutex_init... (cached) POSIX > > checking args to readdir_r... (cached) POSIX > > checking style of sigwait... (cached) POSIX > > checking for pthread_attr_setscope... (cached) yes > > checking can netinet files be included... yes > > Warning: extra-tools disabled because --enable-thread-safe-client wasn't > used > > checking for ORBit... not found > > checking if we should build MySQLFS... no > > checking for OpenSSL... checking character sets... default: latin1; > compiled > > in: latin1 > > checking for BerkeleyDB... no > > Not using Berkeley DB > > checking for Innodb... Using Innodb > > checking for aio_read in -lrt... (cached) yes > > CONFIGURING FOR INNODB > > loading cache ./config.cache > > checking host system type... i686-pc-linux-gnu > > checking target system type... i686-pc-linux-gnu > > checking build system type... i686-pc-linux-gnu > > checking whether to enable maintainer-specific portions of Makefiles... no > > checking for a BSD compatible install... (cached) /usr/bin/install -c > > checking whether build environment is sane... yes > > checking whether make sets ${MAKE}... (cached) yes > > checking for working aclocal... found > > checking for working autoconf... found > > checking for working automake... found > > checking for working autoheader... found > > checking for working makeinfo... found > > checking for gcc... (cached) gcc > > checking whether the C compiler (gcc -O3 -DDBUG_OFF -rdynamic) > works... > > yes > > checking whether the C compiler (gcc -O3 -DDBUG_OFF -rdynamic) is a > > cross-compiler... no > > checking whether we are using GNU C... (cached) yes > > checking whether gcc accepts -g... (cached) yes > > checking for ranlib... (cached) ranlib > > checking for a BSD compatible install... /usr/bin/install -c > > checking how to run the C preprocessor... (cached) gcc -E > > checking for aio.h... (cached) yes > > checking for sched.h... (cached) yes > > checking size of int... (cached) 4 > > checking for sched_yield... (cached) yes > > checking for fdatasync... (cached) yes > > checking whether byte ordering is bigendian... (cached) no > > creating ./config.status > > creating Makefile > > creating os/Makefile > > creating ut/Makefile > > creating btr/Makefile > > creating buf/Makefile > > creating com/Makefile > > creating data/Makefile > > creating dict/Makefile > > creating dyn/Makefile > > creating eval/Makefile > > creating fil/Makefile > > creating fsp/Makefile > > creating fut/Makefile > > creating ha/Makefile > > creating ibuf/Makefile > > creating include/Makefile > > creating lock/Makefile > > creating log/Makefile > > creating mach/Makefile > > creating mem/Makefile > > creating mtr/Makefile > > creating odbc/Makefile > > creating page/Makefile > > creating pars/Makefile > > creating que/Makefile > > creating read/Makefile > > creating rem/Makefile > > creating row/Makefile > > creating srv/Makefile > > creating sync/Makefile > > creating thr/Makefile > > creating trx/Makefile > > creating usr/Makefile > > creating ib_config.h > > ib_config.h is unchanged > > END OF INNODB CONFIGURATION > > creating ./config.status > > creating Makefile > > creating extra/Makefile > > creating mysys/Makefile > > creating isam/Makefile > > creating strings/Makefile > > creating regex/Makefile > > creating heap/Makefile > > creating bdb/Makefile > > creating myisam/Makefile > > creating myisammrg/Makefile > > creating man/Makefile > > creating BUILD/Makefile > > creating readline/Makefile > > creating vio/Makefile > > creating libmysql_r/Makefile > > creating libmysqld/Makefile > > creating libmysqld/examples/Makefile > > creating libmysql/Makefile > > creating client/Makefile > > creating pstack/Makefile > > creating pstack/aout/Makefile > > creating sql/Makefile > > creating sql/share/Makefile > > creating merge/Makefile > > creating dbug/Makefile > > creating scripts/Makefile > > creating include/Makefile > > creating sql-bench/Makefile > > creating tools/Makefile > > creating tests/Makefile > > creating Docs/Makefile > > creating support-files/Makefile > > creating mysql-test/Makefile > > creating include/mysql_version.h > > creating config.h > > > > --------------------------------------------------------------------- > > Before posting, please check: > > http://www.mysql.com/manual.php (the manual) > > http://lists.mysql.com/ (the list archive) > > > > To request this thread, e-mail <[EMAIL PROTECTED]> > > To unsubscribe, e-mail <[EMAIL PROTECTED]> > > Trouble unsubscribing? Try: http://lists.mysql.com/php/unsubscribe.php --------------------------------------------------------------------- Before posting, please check: http://www.mysql.com/manual.php (the manual) http://lists.mysql.com/ (the list archive) To request this thread, e-mail <[EMAIL PROTECTED]> To unsubscribe, e-mail <[EMAIL PROTECTED]> Trouble unsubscribing? Try: http://lists.mysql.com/php/unsubscribe.php
