Hi,
The current MythTv CVS version of MythTV has a stange problem with display on my Via M10K box which uses Via VLD XVMC hardware MPEG decode.
The Via M10K box is a simple client with a separate server containg DVB cards.
Myth CVS after 2005.03.30 has this problem. MythTV CVS before 2005.02.20 is Ok.
If I watch an old recording, all is fine. If I watch live TV or a new recording the video and audio seems to have continuous gaps (about 4 per second) resulting in unwatchable/ unlistenable output. This results in a start/stop display. There are no special messages from mythfrontend. Watching using another system using software MPEG decode and Xv output all is fine.
Could some change to the DVB code have resulted in an MPEG stream that the Via MPEG hardware cannot decode correctly ?
Any ideas ?
Terry
------------------------------------------------------------------------
_______________________________________________ mythtv-dev mailing list mythtv-dev@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
I have been playing around with this and this is where I am:
1. The new DVB code's Autopid feature means that on channels where
there are multiple Audio streams these are saved in the
recording.2. On a Via M10K box using VLD XVMC HW MPEG, this results in very
jumpy display/audio with error messages:
"A/V diverged by 3.0873 frames, extending frame to keep audio in sync"3. Using Xv output with software decoding is fine.
4. Not sending any IDCT data to the HW mpeg decoder has no effect on
the problem.In an example case the recording has a 2 channel audio stream and a mono audio stream (possibly one for the hard of hearing). The overall frame rate when playing this is about 14frames/s. It is almost as if MythTv was trying to sync to the agregate of the two audio streams .....
I would not have thought that using XvMC VLD video decoding would have affected the audio decoding .....
Terry
_______________________________________________ mythtv-dev mailing list mythtv-dev@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
