Terry Barnaby wrote:
Terry Barnaby wrote:

Daniel Kristjansson wrote:

On Mon, 2005-05-02 at 20:31 +0100, Terry Barnaby wrote:

Daniel Kristjansson wrote:
Thanks for adding the patch.
I agree there should not be an exit there, but there does not seem
to be a way of returning an error from this. I must admit, with my
searching through the libavformat and libavcodec code fro the problem there is some room for improvement !



Yep, though it is best to send fixes directly to ffmpeg, to keep syncing simpler. We've synced bugs back into the code from ffmpeg before.


Now I have got the channel changing working better, (although not
ideal as there should be no need to close down and re-create Codecs,
(this could be done in mpegts) ...), I would like to get the
new merged Xv/XvMC code working with XvMC VLD.
Is it worth me having a look at this now, or shall I hang fire untill
you have completed the change to the Xv/XvMC init ?



Now is a good time, I'm holding back on Xv/XvMC changes this week to allow Andy Poling a chance to get his chromakey OSD patch ready for CVS.

-- Daniel



------------------------------------------------------------------------

_______________________________________________
mythtv-dev mailing list
mythtv-dev@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev



Ok, any pointer to get going ? I have just re-compiled from CVS. With XvMC VLD (bob deinterlace enabled or disabled) I get very garbaled sound, Screen display is stuterry with frequent MPEG blocking atifacts. CPU usage is about 14%, which is low (normally about 18%). Mythfront end gives the following error messages:

2005-05-02 21:13:24.504 AddInheritence(A       ) Error, future=frame
2005-05-02 21:13:24.747 AddInheritence( B      ) Error, future=frame
2005-05-02 21:13:24.984 AddInheritence(  C     ) Error, future=frame
2005-05-02 21:13:25.463 AddInheritence(   D    ) Error, future=frame
2005-05-02 21:13:25.704 AddInheritence(    E   ) Error, future=frame
2005-05-02 21:13:25.944 AddInheritence(     F  ) Error, future=frame
2005-05-02 21:13:26.429 AddInheritence(A       ) Error, future=frame
2005-05-02 21:13:26.661 AddInheritence( B      ) Error, future=frame
2005-05-02 21:13:26.904 AddInheritence(  C     ) Error, future=frame
2005-05-02 21:13:27.384 AddInheritence(   D    ) Error, future=frame
2005-05-02 21:13:27.623 AddInheritence(    E   ) Error, future=frame
2005-05-02 21:13:27.864 AddInheritence(     F  ) Error, future=frame

When set to use Xv display and sound is fine although CPU usage
is greater than MythTv CVS 2005-04-22 80% versis 70%.

Cheers


Terry


------------------------------------------------------------------------

_______________________________________________
mythtv-dev mailing list
mythtv-dev@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev

Hi Daniel,

Another point of information on this:
I can get rid of the "AddInheritence" error messages by removing
line 77 in xvmcvldvideo.c
"render->p_future_surface = render->p_surface;"
This line may be incorrect ...

This does not affect things much. With some debug turned on I get
the following info, it appears that the video is going at half
frame rate ???

2005-05-03 07:23:09.039 A/V diverged by 6.41477 frames, extending frame to keep
audio in sync
2005-05-03 07:23:09.119 A/V diverged by 6.44233 frames, extending frame to keep
audio in sync
2005-05-03 07:23:09.199 A/V diverged by 6.57548 frames, extending frame to keep
audio in sync
2005-05-03 07:23:09.208 positionMap[ 42 ] == 10243932.
2005-05-03 07:23:09.279 A/V diverged by 6.6566 frames, extending frame to keep a
udio in sync
2005-05-03 07:23:09.359 A/V diverged by 6.5362 frames, extending frame to keep a
udio in sync
'video_output' mean = '79991.91', std. dev. = '565.37', fps = '12.50'


Terry


------------------------------------------------------------------------

_______________________________________________
mythtv-dev mailing list
mythtv-dev@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev

It looks like the problem is with AVSync (again !).

If I set "disableaudio" in NupplePlayer.cpp video display is fine.
If I set "avsync_avg = frame_interval" at the top of
NuppelVideoPlayer::WarpFactor() all is Ok (bar audio delayed/infront).

What is supposed to happen in NuppelVideoPlayer::AVSync() when
"diverge > MAXDIVERGE" ?
Could it be that with XvMC VLD video frames are not actually "extended" ?

Terry
_______________________________________________
mythtv-dev mailing list
mythtv-dev@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev

Reply via email to