hi all
given the issues with the auto audio sync timecode
adjust with XMVC and with ffrew, this patch will remove it.
also included in this patch is 2 extra controls in
audiosync adjust mode
0 - reset audiotimecodeoffset to 0
1 - set audiotimecodeoffset to the same as the
current video timestamp.
thus there is now a manual method. this is why the
2 seemingly separate functions are combined in 1 patch. will separate if
desired.
it is manually edited but hopefully there wont be
any problems.
the only problem I see is in transcoding a
recording (say dvb/mpeg near the 26.5 hour timestamp mark) to something else
(mpeg4) will permanently cause the audio timestamp in the mpeg4 to be out.
naturally manual audiosync adjust at that point will allow the recording to be
viewed.
If you are running avformat seek patch (not in cvs
yet), then you wont have this problem as it adjusts all the timecodes on
anything being played with avformat to be offset by the start
position.
cheers
mark
|
_______________________________________________ mythtv-dev mailing list mythtv-dev@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev