Hi Brian I didnt include the bits to checks the vendor/model id's in the internal channel changing code. So long as you set the model type in setup to DCT-6200 it will attempt to send the commands.
You will need to update 6200ch.c to add your vendor/model ids for it to work. jim Brian C. Huffman <[EMAIL PROTECTED]> wrote [06.13.05]: > All, > > Have there been any updates to the internal firewire channel change code > that hasn't been backported to the 6200ch.c? Channel changes work fine > using the internal code, but I need to use the external changing script > so that I can still control the box while using the svideo out. I get > the following when running 6200ch: > > [EMAIL PROTECTED] contrib]# ./6200ch -v 6 > node 1: vendor_id = 0x00001371 model_id = 0x0000620a > Could not find Motorola DCT-6200 on the 1394 bus. > > BTW, node 1 is the correct node as evidenced by plugreport: > [EMAIL PROTECTED] contrib]# plugreport > Host Adapter 0 > ============== > > Node 0 GUID 0x00309500a0025501 > ------------------------------ > libiec61883 error: error reading oMPR > libiec61883 error: error reading iMPR > > Node 1 GUID 0x001371fffe059ff9 > ------------------------------ > oMPR n_plugs=1, data_rate=2, bcast_channel=63 > oPCR[0] online=1, bcast_connection=0, n_p2p_connections=0 > channel=0, data_rate=2, overhead_id=0, payload=376 > iMPR n_plugs=0, data_rate=2 > > > Thanks, > Brian > > _______________________________________________ > mythtv-dev mailing list > mythtv-dev@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
_______________________________________________ mythtv-dev mailing list mythtv-dev@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
