Greetings -

I'm starting here, but can be persuaded to move off to the ivtv-devel list if there is no solution known (here)....

I've installed myth 0.16 (wow!) on FC3 with Jared's guide (wow!). I've got TVout working, IR working, life is good...

Except for the ubiquitous "always get static from tuner0" even with ptune and mplayer.

I've tried all the module options, and I get nuttin'. I just saw the tuning frequency stuff, so I'll try that tonight.

I'm running ivtv 0.1.10 (0.1.10-48.4_pre2_ck100zz.rhfc3.at).

QUESTION: Should I upgrade to 0.2.0 ? Has that solved anyone's issue with tuning problems?

FOLLOWUP QUESTIONs:  If so, how do I tell apt to get that version?
.... How can I revert to 0.1.10 should I wish to?


TIA,

Bruce



Iv messages:
Dec 7 23:50:15 localhost kernel: ivtv: version 0.1.10 (0.1.10-48.4_pre2_ck100zz.rhfc3.at) loading
Dec 7 23:50:15 localhost kernel: ivtv: Linux version: 2.6.9-1.681_FC3 686 REGPARM 4KSTACKS gcc-3.4
Dec 7 23:50:15 localhost kernel: ivtv: In case of problems please include the debug info
Dec 7 23:50:15 localhost kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when
Dec 7 23:50:15 localhost kernel: ivtv: mailing the ivtv-devel mailinglist.
Dec 7 23:50:15 localhost kernel: ivtv: Autodetected WinTV PVR 350 card
Dec 7 23:50:15 localhost kernel: ivtv: Found an iTVC15 based chip
Dec 7 23:50:15 localhost kernel: ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11(level, low) -> IRQ 11
Dec 7 23:50:15 localhost kernel: ivtv: Unreasonably low latency timer, settingto 64 (was 32)
Dec 7 23:50:15 localhost kernel: ivtv: pci: VIA detected device: 0x3148 vendor: 0x1106
Dec 7 23:50:15 localhost kernel: tveeprom: Ignoring new-style parameters in presence of obsolete ones
Dec 7 23:50:15 localhost kernel: tveeprom: Hauppauge: model = 48132, rev = I123, serial# = 2867373
Dec 7 23:50:15 localhost kernel: tveeprom: tuner = Philips FM1236 (idx = 23, type = 2)
Dec 7 23:50:15 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08,v4l2 = 0x00001000)
Dec 7 23:50:15 localhost kernel: tveeprom: audio_processor = MSP3440 (type = 11)
Dec 7 23:50:15 localhost kernel: ivtv: i2c attach [client=tveeprom[0],ok]
Dec 7 23:50:15 localhost kernel: ivtv: Tuner Type 2, Tuner formats 0x00001000,Radio: yes, Model 0x00a51493, Revision 0x00000001
Dec 7 23:50:15 localhost kernel: ivtv: NTSC tuner detected
Dec 7 23:50:15 localhost kernel: ivtv: Radio detected
Dec 7 23:50:15 localhost kernel: tuner: Ignoring new-style parameters in presence of obsolete ones
Dec 7 23:50:15 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Dec 7 23:50:15 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok]
Dec 7 23:50:15 localhost kernel: saa7115: Ignoring new-style parameters in presence of obsolete ones
Dec 7 23:50:15 localhost kernel: saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
Dec 7 23:50:15 localhost kernel: saa7115: detecting saa7115 client on address 0x42
Dec 7 23:50:15 localhost kernel: saa7115: writing init values
Dec 7 23:50:15 localhost kernel: ivtv: i2c attach [client=saa7115[0],ok]
Dec 7 23:50:15 localhost kernel: saa7115: status: (1E) 0x48, (1F) 0xc0
Dec 7 23:50:15 localhost kernel: saa7127: Ignoring new-style parameters in presence of obsolete ones
Dec 7 23:50:15 localhost kernel: saa7127: video encoder driver version V 0.3 loaded
Dec 7 23:50:15 localhost kernel: saa7127: Selecting NTSC video Standard
Dec 7 23:50:15 localhost kernel: saa7127: Selecting S-Video+Composite
Dec 7 23:50:15 localhost kernel: saa7127: Turn WSS off
Dec 7 23:50:15 localhost kernel: saa7127: Widescreen Mode 4:3 Full Format
Dec 7 23:50:15 localhost kernel: saa7127: Selecting Normal Encoder Input
Dec 7 23:50:15 localhost kernel: saa7127: Enable Video Output
Dec 7 23:50:15 localhost kernel: ivtv: i2c attach [client=saa7127[0],ok]
Dec 7 23:50:15 localhost kernel: msp3400: Ignoring new-style parameters in presence of obsolete ones
Dec 7 23:50:16 localhost kernel: msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio mode=simpler
Dec 7 23:50:16 localhost kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
Dec 7 23:50:17 localhost kernel: ivtv: Encoder revision: 0x02040024
Dec 7 23:50:17 localhost kernel: ivtv: Decoder revision: 0x02020023
Dec 7 23:50:17 localhost kernel: ivtv: Configuring WinTV PVR 350 card with 9 streams
Dec 7 23:50:17 localhost kernel: ivtv: Create DMA stream 0 using 128 buffers of size 32768
Dec 7 23:50:17 localhost kernel: ivtv: Create DMA stream 1 using 128 buffers of size 32768
Dec 7 23:50:17 localhost kernel: ivtv: Create stream 2 using 128 buffers of size 52224
Dec 7 23:50:17 localhost kernel: ivtv: Create DMA stream 3 using 128 buffers of size 32768
Dec 7 23:50:17 localhost kernel: ivtv: Create stream 4
Dec 7 23:50:17 localhost kernel: ivtv: Create DMA stream 5 using 16 buffers ofsize 32768
Dec 7 23:50:17 localhost kernel: ivtv: Create stream 6 using 128 buffers of size 4096
Dec 7 23:50:17 localhost kernel: ivtv: Create stream 7
Dec 7 23:50:17 localhost kernel: ivtv: Create DMA stream 8 using 16 buffers ofsize 32768
Dec 7 23:50:17 localhost kernel: ivtv: Setting Tuner 2
Dec 7 23:50:17 localhost kernel: tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c driver #0
Dec 7 23:50:17 localhost kernel: ivtv: Setting audio matrix to input 3, output1
Dec 7 23:50:17 localhost kernel: ivtv: Switching standard to NTSC.
Dec 7 23:50:17 localhost kernel: saa7115: decoder set norm NTSC
Dec 7 23:50:17 localhost kernel: saa7115: set audio: 0x01
Dec 7 23:50:17 localhost kernel: saa7127: Setting Encoder Video Standard
Dec 7 23:50:17 localhost kernel: saa7127: Set NTSC Video Mode
Dec 7 23:50:17 localhost kernel: saa7127: Selecting NTSC video Standard
Dec 7 23:50:17 localhost kernel: ivtv: Initialized WinTV PVR 350, card #0
Dec 7 23:50:17 localhost kernel: ivtv: ==================== END INIT IVTV ===
---
Bruce J. McKenzie | [EMAIL PROTECTED] | DoublePup Enterprises, Inc.
http://www.doublepup.com | Consulting Services for Systems Development


_______________________________________________
mythtv-users mailing list
[EMAIL PROTECTED]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Reply via email to