Nick wrote: > > > Nick wrote: > > > > > > <snip> > > > > > > > I'm having no luck however getting the remote control supplied > > > > with the nova-t working under lirc. Has anyone out > there got the > > > > nova-t remote working with lirc under FC3 ? > > > > I tried using the (working) pvr-350's IR receiver/lirc > setup to set up > > the nova-t remote, irrecord failed to find a gap[1] and bombed out. > > > > Rather a pity as the nova-t remote has lots more buttons on > than the > > pvr-350's and I would have thought that two remotes from the same > > manufacturer would at least > > share the same codes but there's obviously something > strange going on. > > Have you seen/tried the info in this > (http://www.gossamer-threads.com/lists/mythtv/users/105786) > thread about using /dev/input?
I've not but I've *got* a working IR setup, it's just it wont read the nova-t remote. > I'm sure that all Hauupauge remotes use the same RC5 control > set (the remotes I got with the 350 and the Nova-T [conexant] > are the same models > ...) but perhaps different codes. > > When you modprobe the DVB cards drives, do you get any LIRC output? I've not tried using the nova-t's IR sensor. This is possibly not really for this list (its more a lirc problem) but nevermind. The problem is that the pcr-350's remote works *perfectly*, is all set up with lirc, works with mythtv everything, I've even got irexec setup to reboot the frontend (and restart the backend if it's down). The nova-t (909) however came with a slightly bigger remote with lots more buttons, a load of which are *perfect* for mythtv so I thought that using the nova-t remote would just be as easy as using irrecord to record the buttons and replace the pvr-350's lircrc file with the new nova-t one. Except it doesn't work and I don't know why. :-( Thanks David
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users