Hi all, this is slightly off-topic, but it concerns the MythBox i'm putting together. :) i finally recieved all my hardware and have assembled it. however, my PVR-250 doesn't seat completely in the motherboard 'AND' anchor to the case. if i seat the card all the way then there is about 1/4 inch between the case and where the card would screw into the case.
my question is: should i just leave the card held only by the PCI riser? or should i unscrew the motherboard and shim it so that the PCI card can be fully seated AND screwed into the case? my only concern with the second option is that when the motherboard heats up it could be damaged from being warped... any suggestions? by the way, the case is the Cooler Master Black MicroATX 5-Bay DeskTop Case, Model "ATC-620C-BX1" (http://www.newegg.com/app/ViewProductDesc.asp?description=11-119-024&depa=1) very sharp! my motherboard is the ChainTech 7NIF2 (micro-ATX). the motherboard seems to fit in the case just fine... thanks, andy ------------------------------------ 6 GMail Invites available Email me OFF-list only...
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users