I added this line to my /etc/modules.conf alias tveeprom tveeprom-ivtv and while I am still getting the blinking cursor, my dmesg output is now this:
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.2.0 (rc3e) loading ivtv: Linux version: 2.4.22-1.2199.nptl_52.rhfc1.at ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip PCI: Found IRQ 5 for device 00:0b.0 ivtv: XXX PCI device: 0x0635 vendor: 0x1039 tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by insmod option tuner: The type=<n> insmod option will go away soon. tuner: Please use the tuner=<n> option provided by tuner: tv aard core driver (bttv, saa7134, ...) instead. saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127[0],ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[0],ok] saa7115: status: (1E) 0x01, (1F) 0xc0 msp34xx: ivtv version msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Jan 25 2005 08:24:56 ivtv: i2c attach [client=MSP3448W-A2,ok] tveeprom: Hauppauge: model = 48132, rev = J333, serial# = 6825603 tveeprom: tuner = Temic 4039FR5 (idx = 33, type = 21) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3440 (type = 11) ivtv: i2c attach [client=tveeprom[0],ok] ivtv: Tuner Type 21, Tuner formats 0x00001000, Radio: yes, Model 0x00a934d3, Revision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware is buggy, use version 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 9 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total ivtv: Registered v4l2 device, streamtype 5 minor 16 ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total ivtv: Registered v4l2 device, streamtype 6 minor 228 ivtv: Create stream 7 ivtv: Registered v4l2 device, streamtype 7 minor 232 ivtv: Create DMA stream 8 ivtv: Registered v4l2 device, streamtype 8 minor 48 ivtv: Setting Tuner 21 tuner: type already set to 2, ignoring request for 21 ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. ivtv: ivtv_enc_thread: pid = 2521, itv = 0xd0a1c620 ivtv: ivtv_dec_thread: pid = 2522, itv = 0xd0a1c620 spurious 8259A interrupt: IRQ7. saa7115: decoder set norm NTSC saa7115: set audio: 0x01 saa7127: Setting Encoder Video Standard saa7127: Set NTSC Video Mode saa7127: Selecting NTSC video Standard ivtv: Initialized WinTV PVR 350, card #0 ivtv: ==================== END INIT IVTV ==================== ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0) ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes. ivtv-osd: screen coords: [0 0] -> [720 480] PCI: Found IRQ 10 for device 00:02.7 PCI: Sharing IRQ 10 with 00:02.6 PCI: Sharing IRQ 10 with 00:03.0 ivtv-osd: original global alpha = 208 ivtv-osd: current OSD state = 39 ivtv-osd: new global alpha = 208 (1 255 0) ivtv-osd: framebuffer at 0xd9510000, mapped to 0xd17cf000, size 1350k ivtv-osd: mode is 720x480x32, linelength=2880 Console: switching to colour frame buffer device 90x30 ivtv-osd: fb0: iTVC15 TV out frame buffer device lirc_dev: IR Remote Control driver registered, at major 61 bttv: driver version 0.7.107 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is Silicon Integrated Systems [SiS] 635 Host intel8x0_measure_ac97_clock: measured 58588 usecs intel8x0: clocking to 48000 lirc_i2c: chip found @ 0x18 (Hauppauge IR) ivtv: i2c attach [client=Hauppauge IR,ok] lirc_dev: lirc_register_plugin:sample_rate: 10 saa7115: decoder disable output saa7115: decoder enable output saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0 saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 i2c-isa.o version 2.8.6 (20040405) saa7115: starting probe for adapter ISA main adapter (0x50000) i2c-proc.o version 2.8.4 (20040207) sis5595.o version 2.8.6 (20040405) sis5595.o: enabling sensors i2c-core.o: I2C adapter 50000: I2C level transfers not supported it87.o version 2.8.6 (20040405) ivtv-osd: MMAP is not safe for ivtv usage ivtv-osd: MMAP is not safe for ivtv usage ivtv-osd: MMAP is not safe for ivtv usage -- Email me if you want a gmail account, I have invites.
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users