I'm not using a PVR-350 for TV output (although I have in the past), but if you can put the SBLive in the PC, I would say go for it.
Myself, since I have upgraded to FC3 (and the latest kernel), I have had nothing but problems getting sound out of two different motherboards (both SiS chipsets, one the 748, the other a 755) with onboard sound using the intel8x0 driver. I just couldn't figure out which mixers to enable with alsamixer, whereas in the past, with FC2, and earlier kernels, I had absolutely no problems at all. I suspect that the intel8x0 driver keeps changing because of the various hardware using that driver (Intel, Realtek, and others), and they keep playing around with the hardware (different channel support based on what is plugged where, etc.), and I've just been too lazy to figure out what is what. I found that the SBLive just made things a lot easier on me. -- Joe --- Ronald Kohsman <[EMAIL PROTECTED]> wrote: > Good sound SBLIVE...crappy AC97. > > At this point, I do not care. I just want sound. > > -r > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Andy Long > Sent: Wednesday, February 09, 2005 1:49 AM > To: Discussion about mythtv > Subject: Re: [mythtv-users] PVR-350 and ivtv - No > sound > > what happens if you add this near the top: > > alias msp3400 msp3400-ivtv > > I would also re-order your modprobe stuff a little > bit so it looks > more like this: > > #====TOP OF MODPROBE.CONF==== > alias eth0 e100 > alias msp3400 msp3400-ivtv > alias tveeprom tveeprom-ivtv > alias snd-card-0 snd-emu10k1 > options snd-card-0 index=0 > install snd-emu10k1... > > > Also, why do you have two soundcards installed? > > > On Wed, 9 Feb 2005 00:15:01 -0500, Ronald Kohsman > <[EMAIL PROTECTED]> wrote: > > > > > > > > Sound comes out when mplayer is used and > mythmusic. > > > > > > > > Nothing for mythtv. > > > > > > > > MODPROBE.CONF: > > > > options snd-card-0 index=0 > > > > alias snd-card-0 snd-emu10k1 > > > > install snd-emu10k1 /sbin/modprobe > --ignore-install snd-emu10k1 && > > /usr/sbin/alsactl restore >/dev/null 2>&1 || : > > > > remove snd-emu10k1 { /usr/sbin/alsactl store > >/dev/null 2>&1 || : ; }; > > /sbin/modprobe -r --ignore-remove snd-emu10k1 > > > > options snd-card-1 index=1 > > > > install snd-intel8x0 /sbin/modprobe > --ignore-install snd-intel8x0 && > > /usr/sbin/alsactl restore >/dev/null 2>&1 || : > > > > remove snd-intel8x0 { /usr/sbin/alsactl store > >/dev/null 2>&1 || : ; > }; > > /sbin/modprobe -r --ignore-remove snd-intel8x0 > > > > alias char-major-81 videodev > > > > alias char-major-81-0 ivtv > > > > install ivtv /sbin/modprobe --ignore-install ivtv; > /sbin/modprobe > ivtv-fb > > > > alias tveeprom tveeprom-ivtv > > > > alias eth0 e100 > > > > > > > > > > > > DMESG: > > > > > > > > Linux version 2.6.9-1.724_FC3 > ([EMAIL PROTECTED]) (gcc > version > > 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Sun Jan 2 > 15:43:49 EST 2005 > > BIOS-provided physical RAM map: > > BIOS-e820: 0000000000000000 - 000000000009f800 > (usable) > > BIOS-e820: 000000000009f800 - 00000000000a0000 > (reserved) > > BIOS-e820: 00000000000e0000 - 0000000000100000 > (reserved) > > BIOS-e820: 0000000000100000 - 0000000027cf0000 > (usable) > > BIOS-e820: 0000000027cf0000 - 0000000027cfb000 > (ACPI data) > > BIOS-e820: 0000000027cfb000 - 0000000027d00000 > (ACPI NVS) > > BIOS-e820: 0000000027d00000 - 0000000027e80000 > (usable) > > BIOS-e820: 0000000027e80000 - 0000000028000000 > (reserved) > > BIOS-e820: 00000000fec00000 - 00000000fec10000 > (reserved) > > BIOS-e820: 00000000fee00000 - 00000000fee01000 > (reserved) > > BIOS-e820: 00000000ff800000 - 00000000ffc00000 > (reserved) > > BIOS-e820: 00000000fffffc00 - 0000000100000000 > (reserved) > > 0MB HIGHMEM available. > > 638MB LOWMEM available. > > On node 0 totalpages: 163456 > > DMA zone: 4096 pages, LIFO batch:1 > > Normal zone: 159360 pages, LIFO batch:16 > > HighMem zone: 0 pages, LIFO batch:1 > > DMI present. > > ACPI: RSDP (v000 PTLTD > ) @ 0x000f62b0 > > ACPI: RSDT (v001 PTLTD RSDT 0x060400d0 LTP > 0x00000000) @ > 0x27cf7424 > > ACPI: FADT (v001 IBM NETVISTA 0x060400d0 PTL > 0x00000001) @ > 0x27cfaee2 > > ACPI: TCPA (v001 IBM NETVISTA 0x060400d0 PTL > 0x00000001) @ > 0x27cfaf56 > > ACPI: MADT (v001 PTLTD APIC 0x060400d0 > LTP 0x00000000) @ > > 0x27cfaf88 > > ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x060400d0 LTP > 0x00000001) @ > 0x27cfafd8 > > ACPI: DSDT (v001 IBM Yelotail 0x060400d0 MSFT > 0x0100000e) @ > 0x00000000 > > ACPI: PM-Timer IO Port: 0x1008 > > Built 1 zonelists > > Kernel command line: ro root=LABEL=/ rhgb quiet > vga=791 > > Initializing CPU#0 > > CPU 0 irqstacks, hard=c03cf000 soft=c03ce000 > > PID hash table entries: 4096 (order: 12, 65536 > bytes) > > Detected 1794.380 MHz processor. > > Using tsc for high-res timesource > > Console: colour VGA+ 80x25 > > Dentry cache hash table entries: 131072 (order: > 7, 524288 bytes) > > Inode-cache hash table entries: 65536 (order: 6, > 262144 bytes) > > Memory: 643144k/653824k available (2020k kernel > code, 10012k > reserved, 676k > > data, 148k init, 0k highmem) > > Checking if this processor honours the WP bit > even in supervisor > mode... > > Ok. > > Calibrating delay loop... 3538.94 BogoMIPS > (lpj=1769472) > > Security Scaffold v1.0.0 initialized > > SELinux: Initializing. > > SELinux: Starting in permissive mode > > There is already a security framework > initialized, register_security > > failed. > > selinux_register_security: Registering secondary > module capability > > Capability LSM initialized as secondary > > Mount-cache hash table entries: 512 (order: 0, > 4096 bytes) > > CPU: After generic identify, caps: 3febfbff > 00000000 00000000 > 00000000 > > CPU: After vendor identify, caps: 3febfbff > 00000000 00000000 > 00000000 > > CPU: Trace cache: 12K uops, L1 D cache: 8K > > CPU: L2 cache: 256K > > CPU: After all inits, caps: 3febf3ff > 00000000 00000000 > 00000080 > > Intel machine check architecture supported. > > Intel machine check reporting enabled on CPU#0. > > CPU0: Intel P4/Xeon Extended MCE MSRs (12) > available > === message truncated ===> _______________________________________________ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > __________________________________ Do you Yahoo!? Yahoo! Mail - 250MB free storage. Do more. Manage less. http://info.mail.yahoo.com/mail_250
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
